Part Number: AFE58JD48 Other Parts Discussed in Thread: AFE58JD16 Tool/software: I'm currently using the AFE58JD48 to develop an ultrasonic imaging device and I have three questions at present.
Firstly, I wonder what the differences are between…
Part Number: AFE58JD48EVM Other Parts Discussed in Thread: AFE58JD48 , , TSW14J50EVM Tool/software: Hi TI experts,
I am trying to use AFE58JD48EVM with TSW14J50EVM. I followed the steps described in section 4.2 of document SLOU521 and have chosen AFE58JD48…
Part Number: AFE58JD48 Other Parts Discussed in Thread: TSW14J50EVM , Tool/software: I'm planning to develop an ultrasonic data acquisition card using your company's AFE58JD48 chip. After conducting research, I intend to purchase three modules, namely…
Part Number: AFE58JD48 hello，
I am using FPGA to configure AFE58JD48. I want to verify the JESD204B link. However, after configuring some registers, I found that the JESD204B IP CORE in the FPGA did not show any received data. Please help to confirm…
Part Number: AFE58JD48 We have a few questions about your AFE5848s. We recently found a single channel on one AFE with a higher DC offset than we would expect – when all of the other channels had an offset within +/-500 counts, this one’s offset was at…
Part Number: AFE58JD48 Hi Sir,
in the figure below, blue arrow indicates the signal path of CW mode, while the red rectangle indicates the VCAT stage
to my understanding, VCAT is not within the signal path of CW mode, however, I found the setting of…
Part Number: AFE58JD48 Hi Sir,
the PDN_CH register can be used to power down VCA of each channel
on datasheet, bit 0 maps to CH1, bit 1 maps to CH2... bit 15 maps to CH16
However, in our test, it looks like the order should be reversed, ie. bit 0 maps…
