Part Number: AFE7950-SP Hello,
I'm looking for reference files to simulate the ADC/DAC side of the AFE7950-SP in AWR/ADS front-end simulations. Can you please provide the measured responses of the chipset and/or die along with IBIS files for the digital…
Part Number: AFE7950-SP Other Parts Discussed in Thread: AFE7950EVM We have a kick off project with NSN, it will use AFE7950-SP for 5G gNB design.
So can you share the AFE7950-SP reference Circuit design to me?
Thanks,
Part Number: AFE7950-SP Looking to confirm the port impedances for the provided SDD11 S1P files.
1FB/2FB Port Impedance: 100 ohms
1RX/3RX, 2RX/4RX Port Impedance: 100 ohms
1TX/3TX, 2TX/4TX Port Impedance: 50 ohms
CLKS Port Impedance: 100 ohms
Part Number: LMX2615-SP Other Parts Discussed in Thread: AFE7950-SP , , LMK04832-SP , LMK04832 , AFE7950 Hi,
We are using LMX2615-SP part in one of our custom boards. I am deriving 2 output clocks from LMX device, one used as the device clock for AFE7950…
Part Number: AFE7950-SP Tool/software: Hi,
does the AFE7950-SP support decimation of the ADC-data, e.g. reduction of bit-resolution from 14bit downto 10bit and so forth?
Thankd for the answer
BR
Part Number: AFE7950-SP Tool/software: Hi,
what is the Switch on / off time of the ADC / DAC for the AFE7950-SP ?
I assume it is around 500 ns? Where can I find this value in the Datasheet?
Thanks in advance!
Best Regards
Bodo
Part Number: AFE7950-SP Tool/software: Hello,
would it be possible to "drive" a single signal to all 4 DACs or
in other words, 4 times (4 DACs) of a signal needed?
Thanks in advance!
Best Regards
Bodo
Part Number: AFE7950-SP Other Parts Discussed in Thread: AFE7950EVM
Tool/software:
Hi TI team,
We are using the AFE7950-SP in our design, so we are referring the below reference design
https://www.ti.com/tool/TIDA-010260
Design name - AFE7950…
Part Number: AFE7950-SP Tool/software: We are using a Polarfire FPGA with Vod specs of 250 - 450mV.
The AFE7950-SP is spec'd at Vid 450mV typical for Syncin. Will the Polar be able to drive the AFE7950-SP Syncin properly?
Thanks!
Steve