Search tips
Showing 54 results View by: Thread Post Sort by
    Answered

  • AFE8000: AFE8000 EVM Test Tone with just the DC209 board using latte software

    Resolved
    Part Number: AFE8000 Tool/software: Hello, I wonder if it is possible to generate a test tone from the DC209 board alone without the FPGA JESD board underneath? I just want to put out a simple tone onto one of the RF TX lines. I have attempted to…
    • Resolved

  • AFE8000EVM: AFE8000: Date abnormal while default configuration

    TI Thinks Resolved
    Part Number: AFE8000EVM Other Parts Discussed in Thread: AFE8000 Hi Team, I am working for the Hong Kong local company named as Velenova Limited. We are using the AFE8000EVM as the RX only development. The development boards I am using are the AFE8000EVM…

  • AFE8000: Unused pins such as GPIO and SerDes

    Part Number: AFE8000 Hi Team, I'm using AFE8000 only for RX - Should I route the JESD204C SerDes complely or should I tie the CML SerDes Interface Lane ## input to GND / 1V2 / Float? Thanks, Moral.

  • AFE8000: mapping GPIO for external LNA bypass

    Part Number: AFE8000 Hi, We are in the schematic phase of the AFE8000. for a new product. According to Figure 7-4 (7.3.2.2 RX Peak and Power Detectors in the full datasheet), 8 GPIO pins of the AFE8000 can be used for an external LNA bypass circuit…

  • AFE8000: afe8000

    TI Thinks Resolved
    Part Number: AFE8000 What is the method to define a specific JESD - SerDes lanes operational in the scenario when only one Quad out of the 8 lanes are required

  • AFE8000: AFE8000

    Part Number: AFE8000 For simulation requirements needs we should have the internal RX and TX filters structure as detailed below: The DUC interpolation filters coefficient for the two next scenarios: 375[MSPS] input signal that interpolating…

  • AFE8000: Termination of unused analogue RX/TX pins

    TI Thinks Resolved
    Part Number: AFE8000 Tool/software: There is information on this forum for how to terminate digital IO pins. However, what is the recommended termination for unused analogue TX and RX pins? Should we use 50ohm termination, ground or let them float? …

  • AFE8000: Is there built-in BFM/ VIP for AFE8000 IP?

    TI Thinks Resolved
    Part Number: AFE8000 Hi, We are planning to use the TI AFE8000 IP for our next project, I wanted to ask regarding TI AFE8000: do you have a built-in BFM/ VIP for this IP? If yes, I would be glad to get some info about it. Thanks, Inbal.

  • AFE8000: AFE8000. Applications for Satcomm. Radiation

    TI Thinks Resolved
    Part Number: AFE8000 Hi, Is there some additional info about the application of the AFE8000 for satellite communications? specifically from a radiation/enviromental tolerance point of view (LEO). Thanks!

  • AFE8000: AFE8311:Datasheet

    Part Number: AFE8000 Tool/software: Please provide the data sheet for AFE8311C3RVBR. We are not considering this for a new design project. It is required for export procedures.

Didn't find what you are looking for? Post a new question.