Part Number: AM5718 Hi,
When displaying the camera image input by MIPI-CSI2 on the screen, scale up/down from 0.1 to 9 times is required.
Please tell me how to scale using scalars in the DSS pipeline. Also If you have any relevant documents or samples…
Part Number: TLK105L Other Parts Discussed in Thread: AM5718 , I am facing an issue with receive side of PRU ethernet (MII) used in our custom board Processor :: AM5718 PHY :: TLK105L interfaced to PRU1 of Processor I am using this interface for raw socket…
Part Number: AM5718 Hi,
For the purpose of adjusting the tilt of the displayed image, I want to rotate the camera image by 1° and display it.
I would like to adjust the tilt in 1° increments, if possible, instead of 90° increments.
Is the image…
Hi,
balaji S said: Iam trying to build the cc66 drivers.
Are you trying to build examples or library?
Also, can you please mention the SDK version you are using?
balaji S said: "../main.c", line 1: fatal error #1965: cannot open source file "ti/board/board…
Part Number: AM5718
Hi,
Customer wants to know how A15 Linux loads and runs the DSP firmware at the underlying code? Is there detailed underlying code or documentation?
We only see how the upper layer code loads the firmware.
ln -s /lib/firmware/TestProgram…
Hi Steven,
In the Gst pipeline I see the input format as YUY2. Encoder expects/supports the YUV NV12 format only.
More details on encoder can be found in the user guide here: git.ti.com/.../docs
Part Number: AM5718 Hi,
We are running into the same issue as this post on an AM5718 board. All software is based on latest PSDK v 06_03_00_106. Looking at kernel source, the dra7xx-clocks.dtsi file has the encoder clock DPLL still set to 388MHz:
From …
Part Number: AM5718 I have to read and write from the physical memory (system ram ). I used ioremap to map the region . Device tree setup is also done. Reading works fine.
I use ioread32 for reading and it works fine.
When I used iowrite32 it does does…
Part Number: AM5718
Hi,
In our application, we will have eMMC in MMC2 and NOR flash in QSPI. The boot can be either from eMMC or NOR flash. We need to interface FPGA to GPMC and it is seen that sysboot is multiplexed with the GPMC AD[0:15] pins. Is there…
Jerome,
yes these MAC IDs are taken from the TI pool. They are unique. you can either use them directly, or use your own pool of MAC IDs.
sorry for the delayed response.
Jian
