Part Number: AMC1305L25 Other Parts Discussed in Thread: AMC1304L05
Tool/software:
What's the max. value of the VCAP pin? in the e/c, it only addresses the 3.45V as typical value.
Sorry, this is for the AMC1304L05. thanks.
Regards
Brian
Part Number: AMC1305L25 Tool/software: We are seeking technical support regarding the Sigma-Delta modulator IC "AMC1305." We are experiencing a noise issue in one of our products that we believe is related to this IC. It is being used to digitize three…
Part Number: AMC1305L25 Tool/software: Customer Quality Department Received R1 10009 20 SI from your company. TI; SOIC16; AMC1305F25DWR; The isolation resistors do not meet the packaging requirements: wet sensitivity level 3, packaging not vacuum-sealed…
Part Number: AMC1305L25 Dear Sir
I want to ask how to design analog input voltage (AIN & AIP) filter parameters?
Current sampling is applied to motor current feedback, and the switching frequency is 10khZ. Is there any suggestion that the filter cut…
Part Number: AMC1305L25-Q1 Other Parts Discussed in Thread: AMC1305M25
Actually, there is an application project where we use TI Chip AMC1305L25-Q1 whose datasheet is attached.
We have a question about pin13 CLKIN that request 5MHz to 20.1MHz for…
Part Number: AMC1305L25 We are using the 1305 AD converter and driving it with a 20MHz clock we could se a ripple on the output signal after sinc 3 filter and down sampling to 100kHz of 12.5kHz. we analyzed the output signal from the 1305 and could see…
Part Number: AMC1305L25 Dear Sir
I want to ask how to design analog input voltage (AIN & AIP) filter parameters?
Current sampling is applied to motor current feedback, and the switching frequency is 10khZ. Is there any suggestion that the filter cut…
Part Number: AMC1305L25 Hello everyone,
We are testing the AMC1305L25 ADC and both output signals are fixed at 1.25V regardless the voltage variations that we apply in the input. We are using a 10 MHz clock signal that we checked is correctly connected…
