Part Number: AMC1305L25 Other Parts Discussed in Thread: TINA-TI , Tool/software: TINA-TI or Spice Models Hi everyone,
can i simulate the AMC1305L25 Ibis model with Tina TI?
Thanks for your help.
Part Number: AMC1305L25 Hi all
According to the datasheet this IC should have an LVDS output with a differential amplitude of 350mV.
Onn my setup in the lab I measure a differential Amplitude of around 730mV which is obviously too much.
I terminated…
Part Number: AMC1305L25 I am not sure I understand the CMTI specification. Please read the following questions from the customer:
I have a request for the typical CMTI for the AMC1305L25. In the datasheet only the minimum CMTI of the AMC1305L25 with…
Part Number: AMC1305L25 Other Parts Discussed in Thread: AMC1304L25 , Hello, Both AMC1304L25 and AMC1305L25 datasheets specifies only TYP value for “Differential input resistance” as 25Kohm. Is Min value for this parameter available?
Regards, Oba
Part Number: AMC1305L25 Other Parts Discussed in Thread: SN65LVDT14 , AMC1305M25 , SN65MLVD203B 1. Is AMC1305L25 able to be configured as single-end communication when both CLKIN_N and DOUT_N pin are connected to ground? Or only LVDS communication is…
Part Number: AMC1305L25 Dear team,
When AMC1305 miss AVDD, DOUT will stay in the obvious level for a long time until have new input.
But during customer's test, they found that DOUT could not hold to "1" or "0", for example, when miss AVDD, DOUT will…
Part Number: AMC1305L25 Other Parts Discussed in Thread: AMC1210 ,
My customer is interested in the AMC1305 for the current sensing of the AC drive motor appication. However, there is a FPGA for the logic control function. They are wondering to know…
