Part Number: AMC1305M25 Hi,
Customer put forward a question about Vclipping. AMC1305’s Vclipping is 312.5mV, but other part, like AMC1306, AMC120x, avago’s part are all 320mV. why AMC1305 is different?
Customer use Vclipping to calculate…
Part Number: AMC1305M25 I'm curious about the two questions here.
1. Why The AGND pin of the AMC1305M25 needs to connect to the one of the R shunt terminal? The floating power supply needs to connect to AVDD & AGND pin of AMC device for bias power…
Part Number: AMC1305M25 Other Parts Discussed in Thread: AMC1203 Hi,
Customer tried AMC1203 before, when AVDD is off, they found there is a software issue. so what about AMC1305?
thanks.
Yuan
Part Number: AMC1305M25 Other Parts Discussed in Thread: ADS1202 Hi,
For customers using AMC1305 and FPGA, do we have Verilog codes for Sinc filter?
Thank you!
Yuan
Part Number: AMC1305M25 Other Parts Discussed in Thread: TMS320F28379D Hi team,
I am helping my customer evaluating AMC1305 with C2000 TMS320F28379D.
I believe our connection configuration is right, and we can get data flow out of AMC1305 data out pin…
Part Number: AMC1305M25 Hi team,
My customer would like to know if the AVDD power noise affect the AMC1305 accuracy. They used UA7805 to provide the 5V to AMC1305 AVDD. When motor excitation, they found AMC1305 accuracy go down, only 10bit ENB. We…
Part Number: AMC1305M25 Other Parts Discussed in Thread: AMC1303M2520 , AMC1306M25 im looking for higher CMTI than 100KV/us for motor appleication .
is there any roadmap for it? thanks.
Part Number: AMC1305M25 Dear team,
Customer wonder how about the INL when Vclipping is +/- 312.5mV?
From datasheet page 8, we could see INL is -4dB~4dB with the test condition is AINP=-250mV~250mV, AINN=0V. How about the INL when AINP=-312.5mV~-250mV…
Part Number: AMC1305L25-Q1 Other Parts Discussed in Thread: AMC1305M25
Actually, there is an application project where we use TI Chip AMC1305L25-Q1 whose datasheet is attached.
We have a question about pin13 CLKIN that request 5MHz to 20.1MHz for usage…
Part Number: AMC1305M25 Customer would like to know how much t D timming when t CLK = 50nS regarding to the 8.12 table in the d/s. Thanks.
Regards,
Brian