Part Number: AMC1306EVM Hi,
I am using the 1306EVM module and F23879D DSP along with the Mathworks embedded coder. I have gone through the register descriptions and now have the peripheral functioning. I have the module connected to SD1_1 on GPIO 16 and…
Hi Jaikai,
Glad that you found the issue. Request you to mark the relevant answer as 'Resolved'.
For the query on AMC1306EVM, I would recommend you to refer AMC1306 Reference Guide . Section 4.3 explains on the pin details to use as input for…
Hi Aditya,
I changed PWM configuration because I need PWM1 to provide clock for both AMC1306EVM and SDFM1.C1.
I have merged ex4 and ex5 so the program now can use PWM8.SOCA to start SDFM data conversion, after pushing
enough data into FIFO, SDFM causes…
Hi Jiakai,
The AMC1306M25 comes in a DWV00008A package, not SOIC-8. The details can be seen here: https://www.ti.com/lit/ml/mpds382b/mpds382b.pdf
or at the end of the datasheet. I recommend purchasing an evaluation module (EVM) to assist with your testing…
Part Number: AMC1210MB-EVM Other Parts Discussed in Thread: AMC1306EVM , , AMC1210 I would like to use AMC1210EVM+AMC1306EVM to test , and I find in user guide the software of AMC1210EVM can not be use in WIN10.
Is there any way to run AMC1210EVM software…
Part Number: TIDA-00080 Other Parts Discussed in Thread: AMC1306EVM , C2000WARE , CDCE906 , AMC1306M25
Good morning.
I was wondering if I can get some advice about the problem I meet with.
The final goal is to operate the TIDA-00080 reference design.
…
Part Number: TMS320F280049 Other Parts Discussed in Thread: AMC1306EVM Hi
I use sdfm_ex5_filter_sync_fifo_cpuread example to check data acquisition from AMC1306EVM board.
I made the following changes to the code:
1. Use PWM1 to provide SDFM an 10MHz clock…
Part Number: TMS320F280049C Other Parts Discussed in Thread: C2000WARE , AMC1306EVM , AMC1303EVM Hi C2000 champs!
Customer tried to run the sdfm example code (C2000 Ware 3.02) for the sdfm function of the TI TMS320F280049C (Launchpad) with two different…
Alexey,
How are you ensuring that voltage difference between terminals of J1 of AMC1306EVM = +250mv? Did you confirm by probing J1 using multimeter?
Regards,
Manoj
Dear Sam,
thank you for your interest in TIDA-00915 and current/voltage sensing. The TIDA-00915 GaN inverter is rated for 200-400V DC-link voltage and the LMG3411 are isolated from the C2000 controlCARD. An inline shunt requires an isolated amplifier…