Part Number: AMC3306M05 Hello experts,
My customers are interested in AMC3306M05 but they don't use our C2000 or other TI's MCU which originally has sigma-delta filter modules.
I learned from the datasheet that sinc^3 digital filter is recommended…
Part Number: AMC3306M05 We are using an AMC3306M05 modulator on a recent board. We have noticed that occasionally, the device would not power up correctly with DCDC_OUT at ~1.8V and diagnostic pin low. After experimenting with the device, we found that…
Hi Arkadiusz,
Okay, I hope your fix works. Some additional information that may help:
Please note that the percentage of ones in the digital output signal is not exactly 100% for full scale input (Vclipping) = +-64mV. This is because the AMC3306M05 generates…
Part Number: AMC3306M05 Other Parts Discussed in Thread: AMC1210 Hi Team,
I have a customer who is currently evaluating AMC3306 , they need a DS demodulator to obtain the digital reading.
I understand that some C2000 family devices from TI do have DS…
Part Number: AMC3306M05 Other Parts Discussed in Thread: AMC3302 , AMC3301 Hi Experts,
While selecting components, I got to read up on using this IC to measure bi-directional currents. But I have a doubt on seeing this application circuit.
Since, INN…
Part Number: AMC3306M05 Dear forum members.
Could you please comment on the nominal and maximum current sinking capabilities of the DIAG pin.
In short how much current could be sunk and still maintain typical TTL/CMOS levels at a supply voltage of 3.3V…
Part Number: AMC3306M05 Hi,
Would you please tell me what is the analog input bandwidth of AMC3306M05 which is not listed in the datasheet? (For the similar parts AMC1306 and AMC1303 I can find their input bandwidth as 800 kHz in the datasheets).
Thanks…
Part Number: TMS320F28388D Other Parts Discussed in Thread: AMC3306M05 , Hi,
Holding time of AMC3306M05 is min 3.5ns.
But TMS320F28388D support only mode 0 at SDFM and it means data read at rising edge.
Could you let me know 3.5ns from rising edge is enough…
Hi Samiha,
1. Can it be interfaced on SPI or uart interface with MCU?
2. Have to measure 1000Vdc & 300A via shunt resistor
a) For voltage sensing , found that https://www.ti.com/product/AMC3336 has inbuilt dc-dc also, so simplifies design, so can use…
Thank you for your reply! There are 2 Versions of the AMC3306 tho, one for 50mV and one for 250mV. I use the the 50mV one: https://www.ti.com/lit/ds/symlink/amc3306m05