Part Number: AMC3336EVM Other Parts Discussed in Thread: AMC3336 I am testing with a AMC3336EVM to see how to read the value detected. I am varying a 1.0V signal between INP and INN, but when I send the chip 16 clock cycles the value received on DOUT…
Hi Samiha, We have written a custom RTL block to read the DOUT from AMC3336EVM, we are starting the sampling when DIAG is set to high. We are giving the 20 MHz clock input and sampling DOUT at every positive edge of clock. We have implemented one counter which…
Part Number: AMC3306M25 Other Parts Discussed in Thread: AMC3336EVM , Hi,
We are using AMC3336EVM. we provided 20MHz clock and 0V input and we are trying to sample the digital out data. We have some queries related this, that are listed below. 1. At every positive…
Hi Smith, Thank you for the response. Sorry for confusion, we are using AMC3336EVM not AMC3306M25. Can you please tell us digital values of different voltages what I mentioned in previous response. Same I'm attaching here. How can I confirm the output…
Part Number: AMC3336EVM Other Parts Discussed in Thread: AMC3336 Due to the absolute maximum ratings of this product, the input voltage range of the INP and INN pins is HGND-6[V]~HLDO_OUT+0.5[V].
If voltage is applied between the INP and INN pins before…
Part Number: AMC3336 Other Parts Discussed in Thread: AMC3301 Hello, all.
I have a prototype application where the AMC3336DWER is closely coupled to some industrial connector leads with 100BASE-TX Ethernet signals. In Fig. 01 you can see the leads close…
Hi Rajat,
Depending on your project timeline, we have a few devices that we can offer.
First is the AMC3336, which is essentially the device you are asking for. This device has not fully released yet and I cannot provide further detail on timeline, but…