Kelong,
My apologies, I should have also included the condition for collecting raw ADC data.
To minimize your periodicity, you need to calculate the total chirping (active frame) time out of total frame periodicity, it should be less that total frame…
Hello.
This is because the firmware has set a limit of 512 chirp loops within a single chirp cycle as this is the maximum that the hardware can support. You can refer to the ICD for more on the various valid ranges for different chirp parameters.
…
Part Number: IWR1443 How to calculate the chirp parameters according to the performance requirement, such as maximum range, range resolution/accuracy, velocity resolution, etc.
Josiah,
There are number of conditions determine the capture process.
1) mmWave device should support the frame configuration. There are constraints for the hardware trigger.
Please refer to ICD document, section 5.5.3 shows all the requirements…
Part Number: MMWAVE-STUDIO Other Parts Discussed in Thread: MMWCAS-RF-EVM Tool/software:
In this interface, I selected "Software Trigger" for the master device in the Trigger Select field and "Hardware Trigger" for the slave devices. However, when…
Hi Cole,
The attached ICD document, section 5.5.3 shows all the requirements for this.
Per the document each trigger should trigger a frame. Once again, can you please confirm you meet all the requirements in the section including the details in figure…
Part Number: IWR1443 Other Parts Discussed in Thread: IWR1642BOOST , TPS7A8101 Are there any recommended strategies and concerns with taking the existing XWR14/16x EVM Boosterpack and porting these over to custom design?
Welcome to mmWave Sensor Forum!
This forum is for discussions and questions pertaining to mmWave Sensor Devices. Users can file queries related to mmWave Sensor AWR , IWR devices and their collateral offering including mmWave SDK, Tools and TI RTOS…
