Part Number: AWR1843AOP Other Parts Discussed in Thread: AWR1843 , Hi TI,
I wanna confirm something as below.
I use SDK mmwave_sdk_03_01_00_02 build up AWR1843 image file before.
Can I program this image file into AWR1843AOP directly or not? I thinking not…
Part Number: AWR1843AOP Other Parts Discussed in Thread: AWR1843 Hi,
I am working on designing a custom system to receive and relay ADC data available from the LVDS lanes on the AWR1843AOP chip to a PC through USB3.0 interface. I had a few questions relating…
Other Parts Discussed in Thread: AWR1843AOPEVM , AWR1843AOP TI’s AWR1843AOP Now Available!
Single-chip 76-GHz to 81-GHz mmWave sensor (AEC-Q100, ASIL-B targeted) with integrated Antenna On Package (AoP)
for 3D Obstacle Detection Sensing Applicat…
Part Number: AWR1843AOP Other Parts Discussed in Thread: AWR1843 , Hello,
In the TI mmwave SDK pinmux for the AWR18xx sensors there is a gap in the pins defined, specifically pins 39 - 46 are unlisted. These pins are listed in the 16xx pinmux however are…
Part Number: AWR1843AOP Hi TI team,
We have a pinmux and CAN-FD peripheral question about AWR1843AoP. Our silicon revision is ES2.0. I am assuming this silicon revision is identical to the released revision on the official AWR1843AoP page.
Our question…
Part Number: AWR1843BOOST Other Parts Discussed in Thread: AWR1843AOP , AWR1843 Does TI have a AWR1843AOP product?
What is the difference between AWR1843 and AWR1843AOP?
Cheers
Hi,
For AWR1843 there is no reference design available for wide angle reference antenna.
Our customer could consider using the newly released AWR1843AOP which has an integrated antenna.
https://www.ti.com/product/AWR1843AOP
Alternatively, there are wide…
Part Number: AWR1843AOPEVM Other Parts Discussed in Thread: UNIFLASH , AWR1843AOP , AWR1843 Hello
I am trying to upload the "xwr18xx_mmw_aop_demo.bin" file onto my awr1843aopevm. I am using UniFlash 6.3.0 and I have selected the "awr1843" as my part (because…
Part Number: AWR1843BOOST Other Parts Discussed in Thread: AWR1843AOP Hi,
I'm working with the AWR1843BOOST with a custom antenna array and I would like to use the traffic monitoring lab with my own virtual array antenna. How I can change the virtual…
Hi,
Based on the original code of the MRR I thought that obj-> numVirtualAntElev = 4 refers to the virtual array of the AWR1843BOOST has in total four antennas in elevation, not for level, so I thought it was the correct nomenclature
Then, I understand…
