Search tips
Showing 107 results View by: Thread Post Sort by

  • AWR2944P: RF Health Monitoring for Tx and Rx Paths on AWR2944P

    TI Thinks Resolved
    Part Number: AWR2944P Hey, I have two questions listed below: How is Tx antenna mismatch or return loss (S11) monitored on the AWR2944P? For the Rx path, is there any mechanism in the AWR2944P to detect or monitor antenna mismatch, return…

  • AWR2944P: Request for TIFS package for AWR2944P HS device

    TI Thinks Resolved
    Part Number: AWR2944P We are developing a product using AWR2944P HS device. We need access to TIFS package which includes: - HSM runtime firmware (hsmRtImg.h) - Secure boot support - OTA security support Currently, the SDK only provides a…

  • AWR2944P: AWR2944P SDK: 3-stage virtual antenna array

    TI Thinks Resolved
    Part Number: AWR2944P Other Parts Discussed in Thread: AWR2944EVM , AWR2944 Dear Sir, Does the SDK support a 3-stage virtual antenna array for more elevation data ? The AWR2944EVM is a two-stage antenna array. Thanks HK,Shin

  • AWR2944P: Matlab Error when using mmWaveStudio rawDataReader with raw data captures from awr2944p

    Part Number: AWR2944P We are trying to post-process data captures from AWR2944P using the rawDataReader MATLAB program that came with mmWaveStudio and we are running into the below error: mmwave Device:awr2944p Input ADC data parameters: dataFmt:0 iqSwap…

  • AWR2944P: AWR2944P DDM: Is calibration cfg supported when MSS_AOA_ENABLED is disabled?

    Part Number: AWR2944P Other Parts Discussed in Thread: AWR2944 Hi TI team, I would like to confirm whether calibration cfg is expected to work on AWR2944P in DDM mode when MSS_AOA_ENABLED is disabled . Our background is as follows: SDK version…

  • AWR2944P: How one SBL works for AWR2944P/ECO/LC

    TI Thinks Resolved
    Part Number: AWR2944P Hi, In mcu_plus_sdk_awr2x44p_10_01_00_04, I only found one sbl_qspi project. It seems one SBL works for 3 different HW, AWR2944P/ECO/LC. I checked the source code, but can't find how it works. Would you pls kindly advise how…

  • AWR2944P: Inquiry regarding RCS value output and lead time for AWR2944P (South Korea)

    TI Thinks Resolved
    Part Number: AWR2944P Dear TI Support Team, I am currently considering the AWR2944P Radar for our project and evaluating its technical capabilities. My primary requirement is to access the RCS (Radar Cross Section) values of detected objects. While…

  • AWR2944P: AWR2944P pin configuration

    Part Number: AWR2944P Hi, SDK 4.7.1.4 CCS 20.1.0 SYSCFG 1.23 Port the driver example in AWR2X44P, check the syscfg, find the pin definition is for AWR2E44P, take I2C as example, shown in below figure, for I2C SDA can select pin T13/T19A19 which…

  • AWR2944P: AWR2944P requires lower processing load than AWR2944 for same advanced-frame RF setting. Is this expected?

    Part Number: AWR2944P Other Parts Discussed in Thread: AWR2944 , Hello TI team, We are porting our application from AWR2944 to AWR2944P , and we observed that an advanced-frame RF configuration which runs on AWR2944 cannot be sustained on AWR2944P unless…

  • [FAQ] AWR2944P: CCS hardware breakpoint on awr2944p

    Part Number: AWR2944P 1.flash in ccs debug image 2. ccs start and launch a configuration using awr2x44p 3.build a debug version and find a variable you may want to monitor like this: here the forth (index 3) in gMmw_MCB.cqSigImgMonCfg with…

Didn't find what you are looking for? Post a new question.