Part Number: AWRL6432BOOST Other Parts Discussed in Thread: AWRL6432 Hi,
The AWRL6432 sensor does not have a permanent memory (flash) in itself. It works by copying the code loaded onto the serial flash into its own RAM. External flash memories can be…
Part Number: AWRL6432BOOST Dear Expert TI team
Hello,
i am reviewing motion and presence demo. ( MMWAVE_L_SDK_05_03_00_02 / using TrackingClassification_MidBw profile - Major&Minor both enable)
and i want to check whether what i understand is correct…
Part Number: AWRL6432BOOST Flashing gesture recognition prebuild image of SDK 05.04.00.01 into AWRL6432BOOST, and send config file gesture_recognition_lpGesture.cfg to the board, but there is no data detected on COM port.
Both visualizer of toolbox 1.30…
Part Number: AWRL6432BOOST Other Parts Discussed in Thread: IWRL6432 Hello TI
I am going to test the example of Doorbell using AWRL6432BOOST. What cfg files and examples are used in the picture below?
I want to know an example where the target area is…
Part Number: AWRL6432BOOST Other Parts Discussed in Thread: AWR6843AOP , AWRL6432 Hi, There
i want to know very basic radar knowledge.
here is our test environment.
1. position a test object which is occur same Doppler during operation.
2. there are two…
Hello Sir,
Please turn on S1.4, as suggested previously. This should result in successful UART connection (you can check this using Tera term also), and you should be able to flash. Please find the attached snaps of our connections and switch settings…
Part Number: AWRL6432BOOST Other Parts Discussed in Thread: AWRL6432 Dear Sir,
We would like to implement Beamforming feature on AWRL6432.
But, from the block diagram of datasheet, it seems no Phase-Shift existed in TX.
Hence, can you help us to check w…
Part Number: AWRL6432BOOST Hello,
i am reviewing motion and presence detection demo, but i have a one question.
according to code, adcbuffdata size is numofadcsamples * numRxAntenas * 4
params->ADCBufData.dataSize = gMmwMssMCB.profileComCfg.h_NumOfAdcSamples…
Hi, there:
Yes, zeroed-out means that the samples over the threshold will be replaced with zeros.
In the Technical Reference Manual ( www.ti.com/.../swru599) , in Table 10-7. Pre-Processing Block Registers, you can find the related field to enable or disable…
Hi,
Thanks, it worked.
The problem was related to loading the image in C:\ti\MMWAVE_L_SDK_05_03_00_02\examples\empty\xwrL64xx-evm\m4fss0-0_freertos\ti-arm-clang to the device. I was loading the code C:\ti\radar_toolbox_1_30_00_05\source\ti\examples\InCabin_Sensing…