Hi Ryan,
Yes, CC3200 can comply to all of your requirements, including being powered from batteries.
There is are battery connection pins on the standard CC3200 development board, which you can simply wire some battery pack to it.
There is also a battery…
Hello Josue,
In regard to the errors you are seeing in CCS, these are expression errors in the expression monitoring window and are not actually code errors. If you were able to compile and load your program to the uC there were no syntax, or undefined…
The Fuel Tank Boosterpack (BOOSTXL-BATTPACK) design has a schematic diagram, but slightly low resolution one. I'm unable to discern some of the sub-script(s) here:
R ISET = K ISET / I ISET ; R ISET =R1 K ISET = 385 A ohms (as per data sheet)
I OUT is currently…
Other Parts Discussed in Thread: CC3100BOOST , CC3100 Hello, I bought this evaluation board: TEXAS INSTRUMENTS EK-LM4F120XL Now, I want to expand it and I think that I can connect it with these 3 boards: - TEXAS INSTRUMENTS CC3100BOOST - ELEMENT14 BOOSTXL-…
Is there any danger of using a higher capacity battery (same voltage) on the Fuel Tank BoosterPack (BOOSTXL-BATTPACK)? The BoosterPack currently ships with a 1200 mAH battery.
I'm trying to run through the documentation for the Fuel Gauge and the Battery…
Hello Maneesh,
The TivaWare 1.1 is a old version of the software release. You might want to update to 2.1.0 version where the example is in
C:\ti\TivaWare_C_Series-2.1.0.12573\examples\boards\ek-tm4c123gxl-boostxl-battpack\boostxl_battpack
check if it…
Other Parts Discussed in Thread: BQ24210 , EK-TM4C123GXL Which pin's are actually necessary for the Fuel Tank Booster Pack?
The example(examples/boards/ek-tm4c123gxl-boostxl-battpack) configures PD0 and PD1 as SCL and SDA pins for the fuel gauge IC…
Thanks for responding. Still unresolved.
This is not an educational journey. I need to evaluate this in a few days, for the purpose of selecting the TM4C1294 for a commercial project.
When installing CCS, i included the 430, and a lot of projects for different…
Hi Jeff, Hi Ryan, thanks for your suggestions. @Ryan i have checked the datasheets of both chips. and found one question regarding both chips. at both chips the datasheet says on page 12 'Extension of the Input Voltage Range on V(driver)' (Page 12) …
Other Parts Discussed in Thread: TPS63001 , TPS63002 Hi Community,
i try to build a LiLon battery powered gadget.
its the first time i have to design buck/boost circuits - so much things to learn..
i have chosen the TPS63001 and TPS63002 for the buck/boost…