Part Number: BOOSTXL-TUSS4470 Other Parts Discussed in Thread: TUSS4470 Tool/software:
The data dump has a graph but no measurement and diagnosis or tabulated results have a value. Other than connecting the device to the transducer, what else do I need…
Part Number: BOOSTXL-TUSS4470 Other Parts Discussed in Thread: TUSS4470 , UNIFLASH Tool/software: I am using TUSS4470 to test my ultrasound transducer, but when I connected the evaluation board to the PC as guided by the instruction. The GUI software …
Part Number: BOOSTXL-TUSS4470 Tool/software: Hello, I'm trying to find the captured ECHO signal on my oscilloscope, but I can't seem to point out the ECHO in the signal. I know the transducer (I'm using it in monostatic configuration) is bursting, because…
Part Number: BOOSTXL-TUSS4470 Other Parts Discussed in Thread: ENERGIA Tool/software: Connected BOOSTXL-TUSS4470 as indicated in user guide (slau822a.pdf). I also verified jumpers J6 (Short 3-4 & 5-6) and J8 (1-2 & 3-4)
Have downloaded GUI and…
Part Number: BOOSTXL-TUSS4470 Other Parts Discussed in Thread: TUSS4470 Hi ,
We are trying to work with the attached 1Mhz Transducer connected to the BOOSTXL-TUSS4470 EVB.
What are the required BPF configurations in the GUI ?
Thanks :)
Dror
1MHz liquid…
Part Number: TUSS4470 Hi ,
We are running the EVB and are Unable to get O4,O3 Status bits indications changing .
What are we missing ?
See attached screenshot showing the Data Monitor and Registres Configuration .
Many thanks for your help
Dror
Part Number: BOOSTXL-TUSS4470 Other Parts Discussed in Thread: MSP-EXP430F5529LP , Hi,
I am using the BOOSTXL-TUSS4470 connected to MSP-EXP430F5529LP. The power mode is set to external only with the jumper position J6 3-4 short and J6 1-2, 5-6, J8 1-2,…
Part Number: BOOSTXL-TUSS4470 Hello,
How do I know which threshold value to use? What parameters should I use to know the threshold value?
Thank you,
Julia
Part Number: BOOSTXL-TUSS4470 Other Parts Discussed in Thread: LAUNCHXL-F2800137 , MSP430F5529 , ENERGIA , TUSS4470 , Can F2800137 LaunchPad be used as a host board to interface with the TUSS44x0 EVM and control its operation? Can you help to give me an example…
Part Number: BOOSTXL-TUSS4470 Hi,
I would like to know if it is possible to use two transducers using only one BOOSTXL-TUSS4470 board. And what modification should I make to BOSSTXL-TUSS4470, if such a change is possible?
I am using MSP-EXP430F5529 LaunchPad…
