Part Number: BP-DAC11001EVM Hello, I am trying to setup the BP-DAC11001EVM. No matter what I put in the DAC_DATA register, the output-voltage remains at 0V. I have set up the board as shown in the users guide and the board is connected to the software…
Part Number: BP-DAC11001EVM Hello,
Our customer used BP-DAC11001EV M and MSP-EXP432E401Y for his application, but the GUI appeared the hardware couldn't connect it.
Connect the USB cable from the lauchpad OTG USB port (U7) to the PC . “Hardware not…
Hi Paul,
The EVM is connected with a Power Supply which is applying:
10V for VCC
-10V for VSS
5V for VIO
5V for REF_PWR
The GNDs are connected to the GND of the Power Supply
So the device is fully powered and I also already tried it…
Part Number: BP-DAC11001EVM Hello Guys,
Good day.
In the datasheet it states Pin 10 as ROFS and Pin 11 as RCM. On the other hand, in its evaluation board BP-DAC11001EVM schematic (User Guide), it labeled Pin 10 as RCM and Pin 11 as ROFS. Which one…
Part Number: BP-DAC11001EVM Other Parts Discussed in Thread: UNIFLASH Hi team,
Both software installation and hardware operation have been carried out according to slau806 User's Guide, including browser extension and TI Cloud Agent installation. Customer…
Part Number: BP-DAC11001EVM Other Parts Discussed in Thread: MSP-EXP432E401Y , , DAC11001A I am trying to look at the glitch energy of the DAC11001A using the BP-DAC11001EVM and MSP-EXP432E401Y. I am trying to trigger on LDAC in order to see the glitch…
Part Number: BP-DAC11001EVM Other Parts Discussed in Thread: MSP-EXP432E401Y Hi,
Is there any example source code for driving the DAC with the MSP-EXP432E401Y board? Or even the source available for the ACCTRL.bin file that is used to interface with…
Part Number: BP-DAC11001EVM Other Parts Discussed in Thread: MSP-EXP432E401Y I am trying to use the BP-DAC11001EVM software to control the board. It is connected to an MSP-EXP432E401Y as shown in the users guide. I was able to load the firmware as described…
