Part Number: ISO7421 Other Parts Discussed in Thread: ISOS141-SEP Tool/software: Hi,
Which option is more suitable for a design to be used in space: Hi-Rel Products/Enhanced Products or AEC-Q100 components with similar construction to SEP?
Part Number: BQ78350-R1 Other Parts Discussed in Thread: BQPRODUCTION , BQSTUDIO , BQMTESTER When I run High Cell bqProduction on the BQ78350-R1, I get Error Code 1233: Command channel not found. What is the cause of this error and what can I do about it…
Part Number: BQ78350 Other Parts Discussed in Thread: BQ76930 , , EV2400 , BQSTUDIO , BQPRODUCTION , BQMTESTER We have a BMS board based on the bq76930 and bq78350-R1 using the TI development board. It is an 8S3P pack using the configuration recommended in…
Hi Javier,
BQ-HI-PRODUCTION was designed to work with the EV2300. The hardware for the EV2300 and the EV2400 are quite different so they are not interchangeable. Additionally the software has not been updated to support the newer EV2400.
Part Number: BQ-HI-PRODUCTION Other Parts Discussed in Thread: BQ34Z100-G1 , , BQ78350-R1 , BQ34110 , EV2400 Hello TI support team.
I gotan issue with BQ-HI-Production software (ver. 2.0.4 Build3). In configuration tab there is only Bq34z100-G1 available…
Hi Thomas,
I sent you a friend request through E2E, please accept and share your schematic and layout there.
I primarily support the USB-C products (TPS25751). Could you submit a copy of this thread but with the primary IC/product being the BQ device…
Part Number: BQ24195L Tool/software: Hello there,
We are designing an IR transmitter for a customer and plan to use the bq24195L as the BMS for the system. The controller will have a single 3.7V LiPo battery and be charged through USB. The current load…
Hi Chris, You are correct with the math. I used BQ studio to quickly calculate the reverse mode current, but I think I am using it wrong.
Writing 0x0000 to register 0x02 should be out of range (400mA to 20000mA), but it seems logical to have the current…
