Part Number: BQ24010 Hello,
We want to charge a 1-cell Li-Po Battery with 250mA charging current through a USB 2.0 input. Issue is that as the battery charges the charging current reduces.
With C4 (Capacitor at Vcc pin)= 100nF
Batt=3.5 Charging…
Part Number: BQ24010 Question 1:The picture shows the charging IC (input) charging current curve, which is BQ24010 to charge the lithium-ion battery. At 10°C, it is found that after the battery is fully charged, after turning the light, there will be…
Part Number: BQ24010 Dear Sir,
We are using BQ24010DRCR in the new design. BQ24010 is not charging the battery corretly, It is starting to charge and after about 20-30 seconds, it stops to charge.
Our circuit is below.
Part Number: BQ24010 Other Parts Discussed in Thread: BQ2970 Good day! I have a li-on battery system. If you look at the picture, can I safely connect the battery output to the input of the system? Or should I put some kind of overdischarge and overcurrent…
Part Number: BQ24010 Other Parts Discussed in Thread: BQ24210 , BQ25170 , BQ25171-Q1 Hi,
I found two quite similar chargers, but both have a different recommend operating temperature: BQ24010: -40C to +125C BQ24210: 0C to 125C
Because I require charging…
Part Number: BQ24010 Other Parts Discussed in Thread: BQ25171-Q1 , BQ25176M , BQ24210 , BQ24040 Hello,
I've been suggested an alternative to the BQ24010, the BQ25171-Q1, because the operating temperature is 0C instead of the required -30C. However,…
Part Number: BQ24010 Other Parts Discussed in Thread: BQ25300 , BQ24040 , BQ25170 Hi, Good day. Our customer wants to know how should they terminate the STAT1, STAT2, and PG pins if unused. Also, do we have a similar product that is newer? Is BQ25300…
