Part Number: BQ24079QW-Q1 Tool/software: Good morning,
I'm sorry to bother you all but, unluckily, I had some problem while testing your device (probably I made some errors in the schematic but I can't find where things went wrong).
I have a…
Part Number: BQ24079QW-Q1
Tool/software:
Hi, Support Team
We will use BQ24079QW-Q1, schematic as below chart"
have any concern?
schematic:
if any suggestion, Please advise me.
Thanks,
Best regards,
Lawrence
Part Number: BQ24079QW-Q1 Hi, Support Team
below chart is our client function block, could workable?
have any concern?
if any suggestion, Please advise me.
Thanks,
Best regards,
Lawrence
Part Number: BQ24079QW-Q1 Other Parts Discussed in Thread: BQ24105-Q1 Hi Team,
As title, I see the datasheet saying that the VBAT(REG) = 4.1V. Does it mean that the battery charger is only for 4.1V Battery?
If so, do we have automotive solution that…
Part Number: BQ24079QW-Q1 Hello,
we are using BQ24079-Q1 for charger. Our application require 1.4A continuous current from input to output supply.
datasheet shows 1.5A max. Can it be used for 1.4A. what will be the temperature rise?
Please provide the…
Part Number: BQ24079QW-Q1 Hello TI Team,
We've used Battery charger IC : BQ240797QWRGTRQ1 and looking to implement Ship mode upon inserting the backup battery pack.
We're trying to implement a circuit around SYSOFF function that will turn off…
Part Number: BQ24079QW-Q1 Hi,
I am using the above mentioned charger. Attached is the schematic. We built 25 boards and all of them have this audible noise when the current is being discharged from the battery.
Although when I connect charger cable to…
Part Number: BQ24079QW-Q1 The datasheet for the bq24079QW-Q1 indicates the OUT pin(s) supply a regulated 5.5V output voltage. Since this device can be used with a USB input (5V), does this mean there is a boost regulator inside the bq24079QW-Q1 to provide…
Part Number: BQ24079QW-Q1 Hi team,
Could you please help to check the resistance of BATFET of BQ240790-Q1? We could not find relative description about this parameter in datasheet.
Hello,
The battery charger uses to BAT pin to get the charge current going into the BAT pin. When the battery voltage gets close to the charger VBATREG or battery regulation voltage, the charge cycle will be in the Constant Voltage mode. At this point…
