Other Parts Discussed in Thread: BQ24113A Designed a charger around the bq24113A, it will be charging 2 lithium coin cells in series, 6v. Input power could come from a wall charger, USB, or always connected solar cells.
Are there potential problems with…
Other Parts Discussed in Thread: BQ24113A , BQ24105 , BQ24103 I'm looking at the bq24113A to charge a 7.4 2cell Li-Ion battery. The datasheet has an min input V of 4.3V and the datasheet only list efficiency graph if teh input V is higher than the charge…
Other Parts Discussed in Thread: BQ24113A 4152.BQ24113A.pdf
The charge current can be setting by a resistor of Iset1 pin on BQ24113A, If I need to control the charge current by host in charging period , the idea is in the attachment file. but I don…
Have you look at switch mode chargers such as BQ24130, BQ24113A or bq24125?
The bq2057W is a linear regulator like the bq24004, but the device requires and external pass transistor and sense resistor. Yes it will support two series cells.
For a simple…
Battery detection has to take some time. If the battery detection time is not acceptable, please try host-controlled architecture shown in Fig.4 on p8 of the bq2410x datasheet using bq24113/bq24113A.
Thanks.
Other Parts Discussed in Thread: BQ24113A , BQ24113 A couple of years ago we switched from the BQ24113 (RHLRG4) to the BQ24113A. Apparently the BQ24113 had a problem with the high side switching fet of the output. The data sheet for the BQ24113 shows the…
Other Parts Discussed in Thread: BQ24113A Hello. I'm fairly new to battery management, and 'd like to find the first thing to look at when the charger malfunctions.
Device: BQ24113A. Schematic: exaclty as is the datasheet's sample schematic. Charger…
