Part Number: BQ24192 Other Parts Discussed in Thread: BQ27531-G1 , , BQSTUDIO
Hello,
We are using BQ27531-G1 along with bq24192 charger. Our circuitry as follows:
As per the circuitry, rechargable Li-ion battery is connected to the BAT pin of bq27531…
Part Number: BQ24192 Other Parts Discussed in Thread: BQ27531-G1 , , BQSTUDIO
Hello,
We are using BQ27531-G1 along with bq24192 charger and we would like to test charging safety timer. In our case, gauge is controling the charger(GG_CHRGRCTL_ENABLE).
…
Part Number: BQ24192 Hi,
Good Day. I have a customer who is using BQ24192 but the battery is not charging. The input source is 5.7V but still it's showing NO DPM and not charging. Below is his I2C configuration. Thank you very much.
gBQ24192IRegMapSet…
Part Number: BQ24192 Other Parts Discussed in Thread: BQSTUDIO , BQ2419XEVM , EV2400 Hi team,
Can you have a look at the following customer inquiry?
We were able to successfully complete the learning cycle for the application battery on the VitaGuard project…
Part Number: BQ24192 Hello Team,
We have BQ24192 as a battery charger to charge our Li-Po battery.
We would like to detect the battery presence/absence using the BQ24192.
Let us know how to implement the same using BQ24192.
Part Number: BQ24192 Hi TI Team,
We are using BQ24192 charger chip in our custom design.
When our system is drawing 2.5A constant current and if we remove the external input, the system draws 2.5A current from fully charged battery.
At that time, We are…
Part Number: BQ24192 Hello Team,
We have used the BQ24192 in our product.
Currently, we are doing the PTCRB test where we are failing the TIS test. We are suspecting that the battery charger might be a culprit here.
I have measured the switching frequency…
Part Number: BQ24192 Hi team,
My customer need to set the protection temperature to 0~45 degrees in the design of BQ24192. Customer saw a recommended values on the spec as follows: RT1: 5.52K; RT2: 31.23K Since this set of resistance values is relatively…
Part Number: BQ24192 Other Parts Discussed in Thread: BQ27426 Hi TI Team,
We have used a BQ24192 charger EVK for charging the battery. I have connected BQ24192EVK with STM32 using the I2C interface for reading and writing the register.
When I try to read…