Part Number: BQ24195 Tool/software: I have some products that use the BQ24195. At the end of manufacturing assembly, the devices are commanded into shipping mode. At this point the power is disconnected from the VBUS pins while the battery stays connected…
Part Number: BQ24195 Tool/software: Hi
We aim to use Shipping mode, it enters, but we cannot manage to exit out of shipping mode while we connect to VBUS +5V
Part Number: BQ24195 Other Parts Discussed in Thread: TPS25751 Tool/software: Hi,
We are using BQ24195 with TP25751 USB-PD controller and we are seeing that the watchdog timer is getting expired after 40 secs as per the default configuration in REG005…
Part Number: BQ24195 Other Parts Discussed in Thread: BQ24192 , Tool/software: Hello Ti Support Team, Kindy explain me difference between BQ24195 vs BQ24192.
Part Number: BQ24195 Tool/software: We are using MPN# BQ24195RGER in one of our project and we performed the thermal simulation. We have a requirement of operating temperature range up to 65°C.
As per thermal simulation results the IC temperature…
Part Number: BQ24195 Tool/software: Does the BQ24195 care about what happens to the USB data lines once input source qualification has been performed?
A customer would like to support both low current charging with USB communications and high current…
Part Number: BQ24195L Other Parts Discussed in Thread: BQ24195 , BQ25619 , BQ24295 , BQ25628 , BQ25618 Tool/software:
Hello,
About BQ24195 design and quiescent current,
Since the quiescent current of BQ25619 is close to 15uA, we tried to use BQ24195…
Part Number: BQ24195 Tool/software: Hello,
I am developing a lab-monitoring system right now and as a starting point we are using a Arduino Portenta Max Carrier Board wich comes with a BQ24195 as battery and power path management ic. Right now I'm facing…
Part Number: BQ24195 Tool/software: Hello, I am using bq2419 IC to charge 2 batteries and I am trying to set the battery charging current to 3A, 1.5A charging current for each battery. But the current is not exceeding from 2A. I am setting the input source…
Part Number: BQ24195 I have requirement in which battery should not be charged if cell voltage is 2.5V. For that I want to make battery which can be discharged to 2.5V but Vbat_dpl is from 2.4V to 2.6V on Vbat failing for BQ24195 so will this allow me…
