Part Number: BQ24232 Other Parts Discussed in Thread: BQ24230 Dear Mr./Mrs,
If input voltage is not a constraint, I would thank your confirmation about the bq24232 repalcement of bq23230 in the circuit below (pin15 connected to ground)
Many thanks in…
Part Number: BQ24230 Other Parts Discussed in Thread: BQ24232 Dear Mr./Mrs.:
We are using the BQ24230 with VIN= 5VDC nominal and PIN 15 connected to VSS. We would like to replace it by the BQ24232 with PIN15 connected to VSS for a direct replacement,…
Part Number: BQ24232 Hi,
I am using Power Supply using BQ24232 in a new project, sourced via the USB port of the PC. The output voltage is 4.4V, but the GSM module that I am using maximum voltage of 4.2V without damage. Which IC can I use instead ? I think…
Part Number: BQ24232 Other Parts Discussed in Thread: TPS22944 Hello,
I am working on a wearable project. I am using BQ24232 to charge my 1S Li-Ion battery.
To avoid problems like:
USB over voltage
ESD problems
High current drawing
Should I use a load…
Hi Alex,
This sounds like a system level observation that isn't rooted from the BQ24232 since you've tried it with fresh new ICs. I'm wondering if you go and try disconnecting your load on IOUT to at least isolate the BQ24232 portion of the schematic…
Part Number: BQ24232 Other Parts Discussed in Thread: BQ25180 , BQ24078 Hello TI- Apps Engineer,
Thanks for recommending the BQ24232 for the battery charger. Seems like an interesting device, works with USB adapter and matches my charging current. However…
Part Number: BQ24232 Other Parts Discussed in Thread: BQ25176M , BQ25504 Would there be much difference in the efficiency in obtaining power from the panel, possibly in low light conditions, using this device versus a specialised solar charging control…
Part Number: BQ24232 Hello,
In a design I have we are using the BQ24232RGTT, to charge a Lithium-Polymer Battery, it has the right characteristics, e.g charges to 4.2V and allows for the correct charging current for the battery we have in mind. However…
Part Number: BQ24232 Other Parts Discussed in Thread: BQ25180 On my prototype device, I found increased consumption through the pin BAT - 16uA !!!, - Li-ion battery is connected (3.9V) - Charge Enable is off ~CE = high(3.5V) - input power IN=5V, no load on…