Part Number: BQ24232HA Tool/software: Dear TI experts,
My customer is testing BQ24232HA for their next project.
Datasheet says that "The nominal temperature range to allow charging is 0°C to 50°C when using a typical 103AT-2 type thermistor."
And…
Part Number: BQ24232HA Tool/software: Dear TI experts,
My customer tests BQ24232HA in their own PCB.
They tested fault timer as the steps below ;
1. Set precharge timer to 44 min.
2. start charging
3. Checks that \CHG LED is blinking at 2Hz…
Part Number: BQ24232HA Dear TI experts,
My customer tests BQ24232HA with their own PCB.
They send me the log file, and I can see the current consumption after charging is complete, during about 1 hour. After 1 hour, no more current consumption is…
Part Number: BQ24232HA Other Parts Discussed in Thread: BQ2432 , BQ24232EVM Hello, I have designed a custom board using BQ24232HARGTT. When the board is switched off, the battery has a consumption of aroud 600uA. May you tell me where may be the problem…
Part Number: BQ24232HA Other Parts Discussed in Thread: BQ24232H , BQ24078 , BQ25180 Hi team,
My customer has an application that will need to change the charging current based on different status of their system.
Does charging current of this device…
Part Number: BQ24232HA Other Parts Discussed in Thread: BQ24075T , BQ24072T , BQ24079T We are planning to use BQ24232HA to charge a LiPo battery. Typically Lipo batteries have max charge temperature of 45gC. The IC has max charging temperature of 50gC…
Hi Romario,
These are actually both correct! The resistor used at Iset is used to set the charging current level when the device is in CC Fast Charge mode. Outside of CC mode, the charging current varies depending on the battery voltage.
This…
Part Number: BQ24232HA Other Parts Discussed in Thread: BQ24232H , Hi, My customer has question. What's the difference between bq24232H and bq24232HA?
Best Regards,
tateo
