Part Number: BQ24312 In section 7.3.1 of the datasheet, there is a reference to Vo(reg) but I couldn't find any other refernce to the value and tolerance of Vo(reg). Can you help clarify?
Best regards,
Matt
Other Parts Discussed in Thread: BQ24312 Hi,
Customer of mine is considering BQ24312
Given that the current is 1.5A, Vin 5V (standard USB power tolerance, 4.75~5.25V), could you adivse what is the voltage drop between Vin (pin1) to Vout (pin8)?
Also, from…
Hi Luis,
Thank you for your advice.
I was looking into the Battery protectors, specifically into the Front-End, cause otherwise, these protectors need separate cell information.
So in our case, we will use a 3-cell LiPo 11.1[V]. I will need a Battery…
David, I really think they need a cap at VOUT. In all cases, VOUT is expected to have 10uF ceramic. I see a diode D6 CRS04, no cap, on Vout in your schematic.
The 24032 has ‘break before make’ and during that time the 10uF at Vout is supposed to hold up…
bq24310 and bq24312 originally had programmale OVP function. However, the accruacy of this function did not meet our 3% target in silicon. Therefore, we decided to release versions with fixed OVP thresholds instead.
