The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.
Part Number: BQ24610EVM Other Parts Discussed in Thread: BQ24610 , , TPS54060 Hi All,
We found a BQ24610 EVM document that can support more than 6 cell as below.
bq24610EVM-603 7-Cell, Li-Ion Battery Charger.pdf
And I have 2 questions that need your help…
Part Number: BQ24610EVM Hi, I have question about schematic, and PCB files place in this post https://e2e.ti.com/support/power-management/f/196/t/657627#pi320995filter=answers&pi320995scroll=false a
What program are these files from?
Part Number: BQ24610EVM Other Parts Discussed in Thread: BQ24610 , BQ40Z50 Dear TI,
The charging current is 16.8V (R25 is changed to about 700 k Ohms) and ISET1 is 2A (R12 is changed to about 3.79k). It is charged to a lithium battery, but the LED (D7) of…
Part Number: BQ24610EVM Other Parts Discussed in Thread: BQ24610 Hi team,
I got a question from customer.
The customer is testing Battery charging IC.EVM default setting. It's charging time so long(6H). Fastcharge Current Regulation Phase is so short…
Part Number: BQ24610EVM I am setting the BQ24610EVM as a 1Cell charging method.
I changed the EVM's R25 to 100k and set the Vbat to 4.2V.
However, STAT1, 2 has no response.
External conditions are:
- Vin : 12V
- Bat : Li-ion 1Cell 3.7V, 14Ah
- Protection…
Part Number: BQ24610EVM Other Parts Discussed in Thread: BQ40Z50 , BQ24610 , Hello,
This question pertains to interfacing a charging module to a battery management module
I Recently purchased a BQ40Z50EVM module for battery management of 4S1P 18650 3.7V…
Part Number: BQ24610EVM Hi Team,
Our customer has follow up inquiries related to the E2E thread below.
e2e.ti.com/.../bq24610evm-the-bq24610evm-is-not-charging-the-battery
Also, I would want to know the equation of the charge current for the taper mode…
Part Number: BQ24610EVM Other Parts Discussed in Thread: BQ24610 Hello,
I am using the BQ24610 EVM board to charge a 4S Li-Ion battery (16.8V peak). I replaced resistors R25 and R28 on the board with a 700kOhms and 100kOhms respectively to get a high side…
Part Number: BQ24610EVM Other Parts Discussed in Thread: BQ24610 Hello,
There are few differences I have noticed between the specifications listed on the BQ24610 IC and BQ24610 EVM. Specifically, the rated input voltage is 33V on the bq24610 datasheet…
