Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: BQ24620EVM Other Parts Discussed in Thread: BQ24620 Hi,
I am trying to analyze the BQ24620EVM layout to help me in my own BQ24620-based PCB design.
The BQ24620 specs call for a single point connection between the AGND and the PGND planes.
Would…
Part Number: BQ24620EVM Other Parts Discussed in Thread: BQ24620 , BQ24640 Hi Team,
I plan use bq24620 design charger for super cap. I need original PCB file(Altium Designer / Allegro) for layout reference.
Could you help send original PCB file to my email…
Part Number: BQ24630EVM Other Parts Discussed in Thread: BQ24620EVM Is there a Gerber files pack available for download for the BQ24630EVM board similar to the "sluc339.zip" package for the BQ24620EVM?
This would be very helpful and much better…
Part Number: BQ24620 If a thermistor is not connected to the circuit shown on the page 23 of the BQ24620 data sheet or to the BQ24620EVM board, would charging still work or would it be disabled?
Thanks,
Alex
Part Number: BQ24620 Hi,
I am trying to troubleshoot a charger board designed to replicate the BQ24620EVM with nearly 100% commonality in components.
The board seems to be engaging but we are getting some strange signal problems on the HIDRV and LODRV…
Hi Jeff,
Today I tried to reproduce what customer is asking. I could reproduce it by using bq24620EVM as attached (I just have only bq24620EVM). It may be latched up due to external noise into SCL/SDA.
Can you also reproduce this on your bench, and give…
Other Parts Discussed in Thread: BQ24620 , BQ24620EVM We are using the bq24620 charge IC on a 1s2p battery pack. In the datasheet, charge termination occurs in CV mode when the charge current drops below Icharge/10.
If our system is as follows:
[wall wart…
Other Parts Discussed in Thread: BQ24620EVM , BQ24600 , BQ24620 I am using the bq24620evm LFP charger with a 1s2p configuration. Each cell has a 3200mah capacity. I am trying to use the bq24600 to charge at 1C or 6.4 amps at 3.65v but it seems like I need…
