Other Parts Discussed in Thread: BQ24702 Hi,
I'm setting my BQ24702 battery depletion target threshold at 12V. (R22 604k, R23 71.5K). When the board is solely power by battery, the alarm does not trigger even the battery drop below threshold voltage. However…
Other Parts Discussed in Thread: BQ24702 Hello,
I am using the BQ24702.
I mounted 20 boards with this chip and noticed that the charging current is not the same depending on the BQ24702 chip.
For example:
I set the current to 210mA with external resistors…
Other Parts Discussed in Thread: BQ24702 , BQ2005 Can I use the 24702 to run run a 24 volt system with 24v of Nimh batteries. Any design notes would be appreciated.
I am building 24v ups for a portable device.
thanks
robert
I have some concerns with the circuit
shown on page 10 of SLU553e.pdf when compared against the schematic
shown on page 34 of sluu160a.pdf.
In slu553e.pdf, the output capacitor
refdes is C11, and listed as optional in the notes at the bottom…
Hi Deepak,
If your input voltage is low, like 5V, then try the BQ24702 linear regulator family. If your input voltage is higher, then try BQ25616.
Regards,
Jeff
Other Parts Discussed in Thread: BQ24800 , BQ24702 , BQ25703 , BQ24780 , BQ25713 , BQ25790 Could you please help me to select battery charger IC and give me some advice?
It is used in products such as Hand-held appliances. I want to choose the chip with hig…
