Part Number: BQ25185EVM Other Parts Discussed in Thread: BQ25185 Tool/software: Even if I disable the CE pin of the BQ25185, charging does not stop completely. Why is this?
Part Number: BQ25185EVM Other Parts Discussed in Thread: BQ25155 , BQ25185 , BQ25180
Tool/software:
Hi everyone,
I’m in need of a battery charger IC for a project where I need to charge a Li-ion battery (3.7-4.2V) using either another Li-ion battery…
Other Parts Discussed in Thread: BQ25186 , BQ21088 , BQ25180 , BQ25188 , BQ25185 , BQ21080 BQ2518x FAQ Home Page
This home page is for common questions in relation to the BQ25188, BQ21088, BQ25185, BQ25186, BQ25180, and BQ21088.
FAQs
----…
Hello,
Thanks for reaching out.
You can find an example of this RC circuit in the schematic of the BQ25185 EVM (R12 and C7): EVM User's Guide: BQ25185EVM
In the EVM, a 4.7nF cap is used with a 2k resistor.
The ISET pin voltage is proportional…
Hi SG,
Thanks for reaching out.
You can find an example of this RC circuit in the schematic of the BQ25185 EVM (R12 and C7): EVM User's Guide: BQ25185EVM
On the EVM, a 4.7nF cap is used with a 2k resistor.
That said, it's only truly recommended…
Hi Warren,
On the USB C Connector side, you will want to configure the device as a sink (or UFP) with resistors pulldown with a 5.1kOhm resistor on each CC pin.
These are the connections on the new BQ25185EVM where we've configured the input as a…
Part Number: BQ25188EVM Other Parts Discussed in Thread: BQSTUDIO , EV2400 , BQ25188 , BQ25186 , BQ21088
The BQ2518x EVM can be used with the EV2400 and bqStudio. Connect the SDA, SCL, and GND pins on the EVM to the corresponding pins on the EV2400…
