Part Number: BQ25601 Other Parts Discussed in Thread: BQ25638 Tool/software: Hi team,
This is Jayden, FAE for ZTE. I found below E2E that you have discussed the max discharging current. But I still want to double check with you.
BQ25601: The Max current…
Part Number: BQ25601 Dear Team,
I am using BQ25601 battery charging IC in my design. whenever battery is not connected, BAT pin is toggling. When the battery is connected, it is proper. Below is my schematic and the waveform observed when the battery…
Part Number: BQ25601D Other Parts Discussed in Thread: BQ25601 Hi Team,
please kindly share slides on difference between BQ25601 and BQ25601D .
customer want to just replace BQ25601D in current BQ25601 design. pin2 is pulled high, pin3 is pulled low. To…
Part Number: BQ25601 Other Parts Discussed in Thread: BQ25622E Hi team,
could you help with below 1-S charger sourcing need? do we have the lowest cost/latest suggestion?
1. Stable charging current is not less than 2A 2. Comes with a pin that can feedback…
Hi Shivani,
Looking at the data sent, this is an interesting issue due to the measurements holding the same shape as the bqStudio log, just with different values for RSOC. Is it possible that there could be some scaling for RSOC that is occurring in the…
Part Number: BQ25601 Hi Team,
please kindly check below.
if there is adaptor on Vbus. when Vbat is short to GND, then we find Vsys is still there.
based on datasheet, seems only batfet will turn off and buck will still work when Vbat is short to GND,…
Part Number: BQ25601 Hi team,
We used BQ25601 for a GSM device that has also RF ASK module receiver to communicate with other devices. the receiver range is good on battery, but as we connect the charger, the range of RF receiver decreases significantly…
Part Number: BQ25601 Dear Team,
Please let me know how to disable the TS pin of BQ25601RTWR.
How to terminate the pin from Hardware side as well as software side if it is not used. Because, Battery we are using doesn't have the NTC Thermistor.
Regards…
