Part Number: BQ25601D Other Parts Discussed in Thread: BQ27Z561 , BQ25601 Hello TI Team,
We are using BQ25601 Charger IC and BQ27z561 Fuel Gauge.
1. Which value should be set to SYS_Min in REG01[3:1] bits?
2. Is there any relation with VBAT voltage and…
Part Number: BQ25600 Other Parts Discussed in Thread: BQ25601D , , BQ25606 , , BQ25601 The JEITA guideline was released on April 20, 2007 to improve the safety of charging Li-ion batteries. The BQ25600, BQ25600D, BQ25601, BQ25601D, and BQ25606 chargers have…
Part Number: BQ25601 Hi
The customer design with BQ25601, the problem is w hen the battery is not connected, the VSYS voltage will fluctuate periodically.
What is the reason for this situation? As shown below:
Attached the schematic as below:
Please…
Hello Shivani,
The differences in the drivers for bq27xxx and bq27z561 are very few, so you can modify for your use based on the newer code
In theory it is possible to flash the golden image through the driver but it will be slow and require work
Part Number: BQ25601 Hello,
We are using BQ25601RTWR for our application and require to reduce tQON_RST time.
Is there any method to do it as i do not find any?
Is there any other similar IC which has variable tQON_RST or tQON_RST<= 3 seconds.
Thank…
Part Number: BQ25601 Hi
The customer design with BQ25601, when the voltage charging to about 4V, the charging current is maintained at 60mA.
But they set the terminate current is 180mA, and there should be no charging current lower than 180mA. In addition…
Part Number: BQ25601 We are a medical device company based in Dublin, currently developing a novel medical device.
We are considering using the BQ25601 charging control IC. I understand this part is IEC 62368-1 compliant.
Can you confirm this and if so…
Part Number: BQ25601 Hi expert,
I would like to see how to set this device in standalone charging, which start charging when the 5V input is presented. Now, I have to push the QON button to start the charging. I didn't configure any register so far, so…
Part Number: BQ25601 Hi
I have a query need your help. According to the datasheet of BQ25601, the BATFET will latch off in OCP .
Is there any other charger that releases OCP automatically?
Thanks
Star