Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: BQ25616EVM Other Parts Discussed in Thread: BQ25616 , Hi!!
I'm working in a new design with BQ25616. I was looking for Altium Files of BQ25616EVM.
Is it possibe help me?
Thanks!
Part Number: BQ25616EVM
Hi,
I saw some other member requested Altium file for BQ25616EVM earlier and received.
Can I also get Altium file for BQ25616EVM?
Many thanks,
Thomas
Part Number: BQ25616EVM Other Parts Discussed in Thread: TPS61027 , BQ25616 , TCA9548A , INA260 Dear TI, First of all, thank you very much for your technical supports, especially with my BQ25616EVM and TPS61020EVM. I was able to get the system to work together…
Part Number: BQ25616EVM Other Parts Discussed in Thread: BQ25616 , BQ25618 , BQ25619 , BQ25619EVM , BQ25606 Hello.
I tested by bq25616EVM about OTG mode. but something is I can't understood.
I need two action in 1USB port. If charger connected then action…
Part Number: BQ25616EVM HI,
I am seeing that the BQ25616EVM has the PMID connector to take the boost voltage to 5V. I would like to know if it is correct to take the 5V 1.2A from the PMID connector or if it is necessary to take them from the VBUS connector…
Part Number: TPS61027 Other Parts Discussed in Thread: BQ25616EVM , , BQ25616 , TCA9548A , INA260 Dear TI, First of all, thank you very much for your technical supports, especially with my BQ25616EVM and TPS61020EVM. I was able to get the system to work together…
Hi Khoi,
My layout review is as follows:
1. The VBUS capacitor is not close to the IC at all.
2. The PMID capacitor can be placed significantly closer to the IC.
3. The REGN capacitor can be placed significantly closer to the IC.
4. The BTST capacitor…
Hi Jeff,
So I measured the resistor of R12 and R22 and they are both very close to 0 Ohm so they are good. I realized that the INA260 chips from adafruit has quite a lot of resistance so the voltage measurement is incorrect.
I removed them and connected…
Part Number: BQ25616 I am using the BQ25616 to manage charging a single LiPo battery and powering the rest of the system (in my design the BQ25616 is on a separate PCBA from the rest of the assembly). The implementation is straightforward, based from…
