Part Number: BQ25618EVM Other Parts Discussed in Thread: BQ25618 Hi Experts, Good day. Our customer is asking in which conduction mode does the BQ25618EVM operate? there is no available information on the datasheets and user's guide. Is it also possible…
Part Number: BQ25618EVM Other Parts Discussed in Thread: BQ25618 , Hi sir,
My customer want to design BQ25618 on their charger box project. They want to use BGA version but there's limited layout data about BGA package on datasheet. Would you please…
Part Number: BQ25618EVM Hi Team,
I searched the forum for the design files of this EVM but it was shared privately via email.
Would you kindly share the same with me?
Thanks!
Marvin
Hi,
Looks like this could be setup related. What is the VBAT at your setup? Do yo use CV mode of electronic load? Can you add a bulk cap at the load? Regarding you have different test results on different EVMs, you may switch the IC units between different…
Part Number: BQ25618EVM Other Parts Discussed in Thread: BQ25618 , EV2400 , BQSTUDIO Hi Team,
We are testing the BQ25618 EVM. We are using the EV2400 interface board with BatteryManagementStudio-1.3.104 (Test) software.
The BQStudio Test software…
Yes, I only used a constant voltage electronic load to simulate the battery. The voltage was set to 3.7 V which is the operating voltage of the battery.
The voltage range of the actual battery is 3 to 4.2 V. With the battery connected, I measured…
Part Number: BQ25618EVM Hi everyone,
I'm using a BQ25618EVM charging IC to conduct accelerated life testing of batteries. I've programmed the board to charge the battery till 4.2V and have disabled the watchdog timer. The battery positive is connected…
Part Number: BQ25618E
We are experiencing a symptom of repeated ON/OFF during charging on the BQ25618EVM evaluation board. The charging current turns ON/OFF cyclically around the battery voltage of 3.3V. This occurs both when the voltage is rising and…
