Part Number: BQ25628 Other Parts Discussed in Thread: BQ25618 , Tool/software: I do not see Linux device driver bq256xx_charger.c mention BQ25628 as one of the parts that it supports. I do see some register map differences between BQ25618 which is the…
Part Number: BQ25628 Tool/software: May I know we have solution to support BR2032 Lithium Fluorocarbon Button Batteries.
https://www.omnergybattery.com/product/br2032-lithium-fluorocarbon-button-batteries
Specifications Nominal Discharge current 0.2mA …
Part Number: BQ25628 Tool/software: Looking to implement use this PMIC on an STM32 based system. Looking for reference driver C code. Would take Linux code if that's all that's available, but C i2c driver is preferred. Thanks!
sminnick@vantagemedtech…
Hi Myrto,
It is good that there is minimal voltage difference between battery and BQ25628 BAT pin with no current flowing, but that does not mean there is no voltage drop with current applied.
As stated in my previous response with the device in charge…
Hello,
Equations 1 and 2 in 8.3.5.4.2 TS Pin Thermistor Configuration detail how to calculate RT1 and RT2. RTH_0degC is the thermistor resistance at 0C for your calculation, RTH_60degC is the thermistor resistance at 45C for your calculation.
VTS_HOT and…
Part Number: BQ25628EVM Other Parts Discussed in Thread: USB2ANY , EV2400 , BQSTUDIO Tool/software: We have ordered the BQ25628EVM for evaluation.
Jumper setup is as below.
The setup is as below.
We have used USB2Any interface board and the “Battery…
Part Number: BQ25628 Can Vsys set to 4.15V?
The application diagram shows it can as shown (attached) on the 1st page of the datasheet.
But Vsysmin in the table shows Range: 2560mV-3840mV (20h-30h).
Is there a range for Vsysmax?
We want to set Vsys = 4…