Hi Christian,
I was also checking the information on the E2E site, but your answer helped us to clear up some of the questions I had in previous threads.
(+) BQ25708: SMBUS 1.1 PEC compliant? - Power management forum - Power management - TI E2E support…
Part Number: BQ24721C Other Parts Discussed in Thread: BQ25708 Tool/software: Hello,
according the datasheet of BQ24721C the minimum battery charging voltage is 9V (register 0x15), this is for the most 2 cell Li ion battery packs to much. As possible…
Part Number: BQ25708 Is it necessary to read the charge voltage (and current) registers from a battery pack and program the BQ25708 max charge voltage and max charge current registers periodically? I was under the impression that, first, you set these…
Hi, Volk,
We have developed a schematic checklist to assist you on the schematic review. Please check it out.
e2e.ti.com/.../faq-bq25730-faq-how-do-i-ensure-the-charger-schematic-is-satisfactory-is-there-a-schematic-checklist-for-ti-buck-boost-controllers…
Part Number: BQ25708 Other Parts Discussed in Thread: BQ25710
Hi,
I'm confused by the formula given on P. 70 for Buck Mode:
Shouldn't this be I_ripple,boost = Vin * D / ( fs * L ), like given on P. 6 of http://www.ti.com/lit/an/slva372c/slva372c…
Part Number: BQ25708
The product folder advertises BQ25708 having "BAT temp thermistor monitoring" feature but I coudn't find it in the datasheet. Is this a typo in the product folder?
Part Number: BQ25708 Other Parts Discussed in Thread: BQ2570 , , BQ25798 Dear support team, I am having issue trying to detect battery removal signal by reading STAT_Battery_Removal bit on PROCHOT status register (SMB address 0x21) on BQ2570.
We are using…
I checked the required components from this post: https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1056344/faq-bq25730-faq-how-do-i-ensure-the-charger-schematic-is-satisfactory-is-there-a-schematic-checklist-for…
Part Number: BQ25708 Other Parts Discussed in Thread: BQ24780S , BQ24765 Hi,
I am looking to use the bq25708 for a lead-acid (12V) battery. My input voltage is 24V so I will not need the boost functionality that this device also provides.
Is it possible…
