Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: BQ25798BKUPEVM Other Parts Discussed in Thread: USB2ANY , BQ25798 Tool/software: Dear Support,
I am trying to evaluate BQ25798BKUPEVM and have followed the instructions as per User Guide and alternatively as here: BQ25798BKUPEVM: BQ25798KUPEVM…
Part Number: BQ25798BKUPEVM Other Parts Discussed in Thread: USB2ANY Tool/software: Dear TI,
I hope that you are doing well. I am trying to connect my BQ25798KUPEVM through USB2ANY, but it says that the hardware connection failed.
It shows my USB2ANY…
Part Number: BQ25798BKUPEVM Other Parts Discussed in Thread: BQ25798EVM , BQSTUDIO Hi
BQ25798EVM performs 1 cell output, whether using BQSTUDIO or MCU with I2C communication is normal, normal communication can be performed using 4.48V voltage and 1~5A output…
Part Number: BQ25798BKUPEVM Dear TI,
I hope that you are doing well. I have shortened the VSYS point as it was loaded at 1A and charger was charging the battery at 1.5A. I changed the resistor of ILIM_HiZ pin from 127k ohm to 27.4k ohm. I did the shortage…
Part Number: BQ25798BKUPEVM Dear TI, I hope that you are doing well. I have a query that I have set the VCHG to 8.4V but when I try to set the VSYS to 8.4V it changes automatically to 8.5V or when I set VSYS to 8.3V it changes to 8.25V. Is there any logic…
Part Number: BQ25798BKUPEVM Dear TI, I hope that you are doing well. I have a query that when the charger input is removed, in that case, will VSYS be retained through battery or it will also become zero? Can you guide one using multiple chargers with common…
Part Number: BQ25798BKUPEVM Other Parts Discussed in Thread: BQ25798 Dear TI, I hope that you are doing well. I have been able to test this EVM completely but there is one issue I am facing right now: When I do the settings in the registers, the settings…
Part Number: BQ25798BKUPEVM Dear TI, I have been able to run the EVM but trying to simulate the hardware faults. The fault registers are not updating although the hardware responds accordingly. I need help in this matter. I have one more question: What would…
Part Number: BQ25798BKUPEVM Other Parts Discussed in Thread: USB2ANY Dear TI,
I hope that you are doing well. I have successfully connected the USB2ANY with BQ25798BKUPEVM through cloud application.
The issue I am facing right now is the configuration…
Part Number: BQ25798BKUPEVM Dear TI,
I hope that you are doing well. My question is when I am discharging the battery through VSYS and there is not input to the charger, why there is not current showing on ADC IBAT in the cloud GUI? Can you please guide…
