• 

  ankit panchal

  • 28 days ago
  • Power management
  • Power management forum

  BQ27510-G3: Bq27510-g3 Gpout pin not toggle

  TI Thinks Resolved

  Part Number: BQ27510-G3 Hi, when over(out of range) temperature and recover temperature detected Bq27510-g3 Gpout pin not toggle.
• 

  ankit panchal

  • 1 month ago
  • Power management
  • Power management forum

  BQ27510-G3: Bq27510-g3 voltage difference

  TI Thinks Resolved

  Part Number: BQ27510-G3 Hi, I calibrate bq27510-g3 gauge voltage and current but during discharging and charging measure voltage difference between bqstdio and multimeter Aprox 30 mV. This is normal ? Battery design capacity : 2500 mAh Battery nominal...
• 

  ankit panchal

  • 1 month ago
  • Power management
  • Power management forum

  BQ27510-G3: bq27510-g3 configuration for Temperature

  TI Thinks Resolved

  Part Number: BQ27510-G3 Hi, I want share battery TS pin connect both charger and gauge. can i share battery TS pin to gauge(bq27510-g3) and charge(bq25601)?
• 

  nicolas ladaurade

  • 3 months ago
  • Power management
  • Power management forum

  BQ27510-G3: BQ27510-G3 wrong time to empty

  • Resolved

  Part Number: BQ27510 - G3 HI, I use the component BQ27510 - G3 for the measurement of the discharge
• 

  ankit panchal

  • 1 month ago
  • Power management
  • Power management forum

  BQ27510-G3: bq27510-g3 What meaning of Wait_id flag?

  TI Thinks Resolved

  Part Number: BQ27510-G3 Hi, What meaning of WAIT_ID flag ? when this flag is clear and set ? After learning cycle this flag should be clear or not as Trm or not ? As per Trm this flag for Waiting to identify inserted battery.
• 

  Karlis Tucs77

  • 1 day ago
  • Power management
  • Power management forum

  BQ27510-G3: FullChargeCapacity not being learned

  Part Number: BQ27510-G3 Hi. I am having problem with BQ27510-G3 gauge. I have written Design capacity(subclass id- 48) to 1800, Qmax Cell 0(subclass id - 83) to 1800. No other parameters have been edited from default ones. I did a couple of charge/discharge...
• 

  ankit panchal

  • 1 month ago
  • Power management
  • Power management forum

  BQ27510-G3: battery capacity is over compare to design capacity

  TI Thinks Resolved

  Part Number: BQ27510-G3 Hi, My learning cycle of battery successfully done. In learning cycle and after learning when i am try to charge my battery. i observed my battery capacity over charging with compare with design capacity. This is expected behavior...
• 

  ankit panchal

  • 2 months ago
  • Power management
  • Power management forum

  BQ27510-G3: Update status not update 0 to 1 during learning cycle

  • Resolved

  Part Number: BQ27510 - G3 Hi, I am try to learning cycle for ba27510- g3 with 2800 mAh battery
• 

  K. Sasaki14

  • 3 months ago
  • Power management
  • Power management forum

  BQ27510-G3: Used Ra table selection

  • Resolved

  Part Number: BQ27510 - G3 bq27510 - G3 has two kind of Ra tables, Ra0 and Ra1. After learning cycle, I
• 

  Wyatt Keller

  • 2 months ago
  • Power management
  • Power management forum

  RE: BQ27510-G3: Difficulty with jamming the I2C Bus to test an error-recovery routine

  Hello Atlant, Currently none of the gauges use SPI, and I'm not sure if there are plans in the near future to support this communication as well. Hopefully there will be! I am sorry I can't give a better answer, it looks like you may have...

Didn't find what you are looking for? Post a new question.

• Ask a new question