Part Number: BQ27545-G1 Other Parts Discussed in Thread: BQ40Z50 Could you please tell me how to check the error of BQ27545 using i2c command or DF reading?
Currently, what I have confirmed from the datasheet (bq25745-g1.pdf) is as follows:
MaxError(…
Part Number: BQ27545-G1 Hello. Sorry if a similar question has already been asked. Please check the typo in DS( www.ti.com/.../bq27545-g1.pdf).
'Operating Configuration C' is written in the following four places. These are 'Pack Configuration C'…
Part Number: BQ27545-G1 Hello.
How often is DF updated? I am thinking about the accuracy of the information that can be recovered from the DF when the fuel gauge is disconnected from the battery due to an accident.
1. Is there a case where the entire DF…
Part Number: BQ27545-G1 Other Parts Discussed in Thread: BQSTUDIO , Hi,
Please let me know just in case. If this IC is disconnected from the battery while it is operating, will the discharge amount count in the internal register return to zero the next time…
Part Number: BQ27545-G1 Hi
The customer want to know the method to verify the chip is in the hibernate mode.
A non-destructive inspection method is required. Measuring power consumption is not non-destructive.
REGIN is connected to P+, and theoretically…
Part Number: BQ27545-G1 Other Parts Discussed in Thread: BQSTUDIO Hi
The customer used bqstudio to detect 30 groups in stock (which have entered hibernate mode). The hibernate flag of bqstudio with 9pcs batteries is green.
what are the conditions for…
Part Number: BQ27545-G1 Other Parts Discussed in Thread: BQSTUDIO Hello, I lead the cell test efforts at NanoGraf and I was hoping to get the V-SOC table for our cell with the ChemID: 7289 Since I'm a cell person, I do not have a device to connect to the…
Part Number: BQ27545-G1 Other Parts Discussed in Thread: BQ27546-G1 , BQ27Z561 Hi Experts,
is there a complete overview of the differences between BQ27545-G1 and BQ27546-G1 available?
I'm reading in the Forum the BQ27545-G1 used to be NRND but is now…
Part Number: BQ27546-G1 Other Parts Discussed in Thread: BQ27545-G1 , Hello
We are considering to switch from bq27545-G1 to bq27546-G1 in a battery pack design. We are concerned that there might be some changes in the I2C behavior (e.g. delay times after…
Part Number: BQ27545-G1 We have questions about the circuitry for SDA and SCKL. From bq27545-Q1 EVM, it uses 100ohm for R6/7/8/9. Due to the system design, pull high resistance is low at system side, we worry about 100ohm may not able to pull data/CLK…