Part Number: BQ27Z746-DEVICE-FW Other Parts Discussed in Thread: BQ27Z746 Tool/software: what charge chip works best with the BQ27Z746-DEVICE-FW and how do you connect the two together?
Part Number: BQ27Z746-DEVICE-FW Tool/software: 1、Schematic evaluation:
A、The circuit needs to have a "0V" no-charge function, how much resistance does R12 need in the circuit? Is the current circuit suitable?
B、The precision resistance supported…
Part Number: BQ27Z746 Hi TI team
We read the Total FW runtime from Lifetime Data Block 3 via ManufactureAccess.
The block value is 2229, which converts to a Total FW runtime of 17490 hours.
However, the data we read from Data Memory is 17484…
Part Number: BQ27Z746-DEVICE-FW Other Parts Discussed in Thread: EV2400 , BQSTUDIO , BQ27Z746 Hello,
We're trying to use this fuel gauge component in our product and part of our production sequence requires that we overwrite the device's flash data…
Part Number: BQ27Z746-DEVICE-FW Other Parts Discussed in Thread: BQSTUDIO , MKST-3P-ALT-EV2300 , BQPRODUCTION Hi,
I need to update Battery Pack Firmware using Battery Management Studio
When I use a 'Firmware' menu, and I can update it
but, There…
Part Number: BQ27Z746-DEVICE-FW Other Parts Discussed in Thread: BQ27Z746 , BQSTUDIO Hello,
one of my customer built prototype of battery pack w/ BQ27z746 inside. And reported that calibration value was interrupted(changed) during firmware upload to…
Hi,
Default R1 FW is available at the link below, it can be flashed onto R0 devices. One thing to note is that this is default FW and all the registers that were previously configured will need to be reconfigured, I suggest pulling the customer .gg…
Part Number: BQ27Z746 Hello,
Wondering if there is anyway to shutdown the GG via an I2C cmd with ENAB pin just constantly pulled to ground.
Thanks!
Austin
Part Number: BQ40Z50-DEVICE-FW Other Parts Discussed in Thread: BQ40Z50 Tool/software: Which version has fixed the following problem: During the simulation of the charging end of BQ40Z50 (39 seconds after the NCT starts), a discharge current occurs, causing…
Part Number: CC1407P Other Parts Discussed in Thread: UNIFLASH Hi TI Support Team,
I am currently help customer to evaluat the CC1407P (using BP-CC1407-P-8-FE BoosterPack connected via XDS110) with SmartRF Studio 8 v1.4.0 ALPHA and the simplelink_cc140x_phy_settings_1_10_00…
