Part Number: BQ2946 Hi Expert,
My customer wonder to know if output pin status once Vcc is reach to 2.5V and lower than 3V. the output pin is unstable or always keep low ? or any other result ?
Please confirm and it is very important in design.
Eddie …
Part Number: BQ2946 Hello,
We are considering BQ294682 for our design, but we have some doubts about a suitable fuse.
The reference given in this post is not available in our distributors:
https://e2e.ti.com/support/power-management-group/power-management…
Part Number: BQ2946 Hi,
I am looking into a bq2946 design. bq2946 datasheet 'Recommended Operating Conditions' specifies Vdd and cell input voltage in different values, would it be safe to use a dedicated source to power Vdd within such conditions? Any…
Part Number: BQ2946 Hi,
couple of questions regarding the OUT pin of BQ294602:
1) In the datasheet, we specify in test item 1.14 the current for Iout(short) with typical 1.5 mA, max 3 mA. Does this mean that the device is able to drive this current reliably…
Part Number: BQ2946 Hello,
we have to check if the overvoltage detector BQ294624 causes problems at overtemperature.
The data sheet shows +110 ° C and +85 ° C limits.
We expect that it works up to +110°C.
We have a running series production…
Part Number: BQ2946 Hi!
I have a question regarding the fuse you use in the datasheet! Is this a standard double fuse with 3pins?
Is BQ2946 available at devboard?
BR Christian Ö
Hello,
I have problems with the BQ294602 overvoltage protection.
I have several prototyping circuits where it switches at 4,35V and several where it switches at 4,5V. No oscillation, stable conditions.
www.ti.com/.../bq2946.pdf
All BQ294602 should…
