Search tips
Showing 882 results View by: Thread Post Sort by

  • BQ34110: BQ34110 query

    TI Thinks Resolved
    Part Number: BQ34110 Hi Team, If the LiFePO4 battery is discharged only by 3% from its full capacity charge (i.e. 100% to 97%) once in 3 months on customer product, then will the SOC, SOH and Time-to-Empty parameters from BQ34110 be accurate for the…
    • Answered

  • BQ34110: Can this device used in normal battery application?

    Resolved
    Part Number: BQ34110 Other Parts Discussed in Thread: BQ40Z50 , BQ27Z746 Tool/software: Hi team, In datasheet, this device is suggested in rarely discharge battery application. But may I know can this device be used in normal CHG/DSG battery application…
    • Resolved

  • BQ34110: bq34110 wrong value of Full Charge Battery Capacity

    Part Number: BQ34110 I use the Battery Management Studio to set the Learned Full Battery Capacity in the Data Memory to 20000mAh But the reported full charge capacity on the register stays at 2200mA. What am I doing wrong ?

  • BQ34110: can not set any config from BQ studio

    Part Number: BQ34110 Other Parts Discussed in Thread: BQSTUDIO , Tool/software: HI,I've been struggle against BQ Studio for several days, and can almost memorize the whole manual and related docs.My Battery is a 8 series of cells of LiFePO4 with 6Ah Capacity…

  • BQ34110: Writing to Data Flash only sometimes works

    Part Number: BQ34110 Other Parts Discussed in Thread: BQSTUDIO , EV2400 Tool/software: Hi, I'm using a BQ34110 in a product that our OEM partner did the hardware design for. I'm now doing the driver for this chip, with a direct i2c interface. When…

  • BQ34110: BQ34110 with LFP Batteries : RSoC Issue

    TI Thinks Resolved
    Part Number: BQ34110 Hi, Does BQ34110 requires discharge - charge cycle when it gets powered up to get proper battery percentage readings for LFP Batteries? In our case we are using two 3.65V LFP Batteries in series. We have also implemented…

  • BQ34110: ROM mode

    Part Number: BQ34110 What is I2C protocol for bq34110 in ROM mode. I found its I2C adders switch from 0xAA to 0x16 in ROM mode. What registers and commands it has in ROM mode? Thanks Sergei

  • BQ34110: How to clear interrupt (ALERTPIN1 & 2)

    Part Number: BQ34110 Tool/software: Hi, How to clear the interrupt signal on ALERT 1 and Alert 2? Based on the TRM, it says to just read the ALERT1STATUS(), the address is 0x5E/5F. When i try to read the registers its giving me a vague values and…

  • BQ34110EVM-796: Issue in golden Image Discharging with BQ34110 Fuel gauge

    TI Thinks Resolved
    Part Number: BQ34110EVM-796 Other Parts Discussed in Thread: BQ34110 , BQSTUDIO Tool/software: Hello, I am using the BQ34110 EVM to manage a 2-cell series configuration (2000 mAh battery) and have generated the golden image for this setup. During…

  • BQ34110: BQ34110

    TI Thinks Resolved
    Part Number: BQ34110 Hi, my question is about BQ34110. I am looking for battery guage that is suitable for single cell NIMH (cell voltage 1.2V). does BQ34110 fit for single cell NiMH ? Thanks.

Didn't find what you are looking for? Post a new question.