Part Number: BQ34110EVM-796 Other Parts Discussed in Thread: EV2400 , BQ34110 Hi,
I am using a BQ34110EVM-796 board. I have made connections as per the user guide.
1. Power supply of 6V is connected between BAT+ and BAT- pins.
2. J2 jumpers are on >5V…
Part Number: BQ34110EVM-796 Other Parts Discussed in Thread: BQSTUDIO , BQ34110 Hello everyone, I am using the bq34110EVM-796 module without using the bqstudio software. I want to retrieve the real-time voltage() of my battery. The battery I'm using is…
Part Number: BQ34110EVM-796 Other Parts Discussed in Thread: BQSTUDIO , USB2ANY , BQ34Z100 , EV2400 Hi,
I have a problem communicating with the EVM. I'm trying to connect via the USB2ANY but the BQStudio dowsn't recognize it. Nor it recognize it with I2C…
Part Number: BQ34110EVM-796 Hi there,
Just checking out the schematics of the BQ34110EVM-796 (i.e. in SLUUBI1A). Now I struggle to understand the idea of Q3. So firstly I understood it as en/disable circuitry for the battery voltage that goes into "BAT…
Part Number: BQ34110EVM-796 I have successfully programed a bq34110EVM up to the point of updating the Chemistry, where I get an Error Code = 772 and
"Chemistry programming Error: No acknowledgement from device" . I am using an EV2300 and Chem ID is 5271…
Part Number: BQ34110EVM-796
Hi Ti
I am using bq34110EVM-796 Evaluation Module connected as below.
Using this for Lead Acid Battery. (12V@ 12AH).
Below is the problem
All of sudden Time to empty went to 3 mins,
Before at 13:12(time) it was showing 48…
Part Number: BQ34110EVM-796 Hi,
I'm using battery monitor chip (with mentioned part number), and I have an issue while updating access mode.
My steps as the following:
1- Read access mode by reading operation status register and get SEC0 bit and SEC1…
Part Number: BQ34110EVM-796 Other Parts Discussed in Thread: EV2400 , BQSTUDIO Hi Ti
> I am Using BQ34110EVM-796 attached to ev2400 and connected with BQ studio.
> My battery is LEAD Acid Battery 12V/12 AH.
> Using GPC i had received the ZIP File…
Part Number: BQ34110EVM-796 Other Parts Discussed in Thread: BQSTUDIO , BQ34Z110 , EV2400 Hi,
I am using GENESIS LEAD ACID BATTERY NP12-12T ( 12V - 12.0AH) 151LX98WX95H.
I have made BQstudio (1.3.101) setup with BQ34Z110 (with default firmware) and EV2400…
Part Number: BQ34110EVM-796 Other Parts Discussed in Thread: GPCCEDV Hi Ti
I am using bq34110EVM-796 Evaluation Module connected as below.
Using this for Lead Acid Battery. (12V@ 12AH).
I had configured all the values in data memory of chip, using BQ…