Part Number: BQ34Z100-G1 Other Parts Discussed in Thread: GPCCHEM Tool/software: Hi，
Recently, a Battery with abnormal data was received, and the SOC maintained 100% during discharge. Reading the data through Battery Management Studio, it was found that…
Part Number: BQ34Z100-G1 Other Parts Discussed in Thread: BQ34Z100 Tool/software: Im currently working on a current calibration function in C++ for the BQ34z100. In order to do the current calibration I need to convert my calculated CC Gain and CC Delta…
Part Number: BQ34Z100-G1 Other Parts Discussed in Thread: BQSTUDIO , EV2400
Tool/software:
Hi, when i try to program a selected chemistry in my gauge i have the erros:
Chemistry programming failed!
Error code = 1721.
And in the bottom left side of…
Part Number: BQ34Z100-G1 Tool/software: I inherited this design. Originally we had set up REGIN as shown in the data sheet. When our board was moved to a bigger stack (32Ah from 19.2 Ah). We started seeing spikes on REGIN and blowing parts next to this…
Part Number: BQ34Z100-G1 Tool/software: Hello.
I have a question.
I made a 24V solar charging/discharging system,
It is found that the SOC information of the battery that is read by the I2C bus suddenly reads strangely.
If you look at the Excel file…
Part Number: BQ34Z100-G1 Tool/software: Hello,
The BQ34Z100-g1 datasheet states that we need to connect the TS pin via reg25 for external NTC measurement.
The maximum input voltage range of TS1 is 1V and the ADC input resistance value is 8M ohm.
The…
Part Number: BQ34Z100-G1 Other Parts Discussed in Thread: BQSTUDIO Tool/software: Hi Team, Could you please provide a list of the chemical IDs supported by the BQ34Z100-G1 IC?
Thanks and Regards Karthik P R
Part Number: BQ34Z100-G1 Other Parts Discussed in Thread: BQ34Z100 , BQSTUDIO Tool/software: hi team
my customer is using BQ34Z100 and they found that the fuel gauge current performs automatic current calibration in standby and shutdown modes, and probabilistic…
Part Number: BQ34Z100-G1
Tool/software:
Hi ,
We have run into wrong "Battery Full Capacity" reports from the fuel gauge BQ34Z100-G1. It is a ~106.4Ahr LFP battery, with 16S1P config.
The Golden Image capacity of this battery came out to be…
Part Number: BQ34Z100-G1 Other Parts Discussed in Thread: BQSTUDIO , BQ34Z100 Tool/software: Dear,
We have fixed gauge configuration and now we have no more remaining capacity to 0 cf. question "BQ34Z100-G1: RemainingCapacity dropping down to 0".…
