Part Number: BQ35100 Tool/software: Hi team,
Please tell me some of them.
Q. In EOS mode, the sequence of sending GAUGE_START() 1 second before high load pulse, sending GAUGE_STOP() immediately after pulse stop, and waiting for G_DONE is shown. but…
Part Number: BQ35100 Tool/software: Hi guys,
In my application that the BQ35100 is placed inside the same enclosure as the primary battery, LiSOCl2 in this case,
My question is, for your experience how necessary is to use the external NTC to achieve…
Part Number: BQ35100
Tool/software:
Hi,
We're using a BQ35100 with a Li-SOCl2 battery and an SPC1520 so we use CHEM_ID 0x0619. Our boards also have a fuse, so we have a larger static resistance and as such we scale the Ra tables to account for this…
Part Number: BQ35100 Tool/software: In the bq35100. To get the the accumulator to increment as opposed to decrement the sign of the applied voltage must be NEGATIVE. The documentation states is should be positive is section 3.8 current calibration...
Part Number: BQ35100
Tool/software:
For example, if the system enters a high power state (500 µA) for 30 s every 4 hours, the average current will be: 315 µA × 30 s / 4 h = 0.66 µA ^^^shouldn't that be 500 µA × 30 s / 4 h = 0.66 µA ? Assumes low power…
Part Number: BQ35100
Tool/software:
Hi,
In the TRM(SLUUBH1C–August 2016–Revised March 2018), CC offset units are mA and board offset units are "counts".
Counts of what?
Moreover, in the current calibration process, both are subtracted from…
Part Number: BQ35100 Hello, I'm going through the calibration process of the bq35100, I've set the device in calibration mode (verified by see reading bit 12 of the control register), but when I go to read cal_voltage I read 1000 (mv) constantly, though…
Part Number: BQ35100 Tool/software: Hi
My customer are using coin battery, 3V/1000mAh. The requirement for the gauge is < 3% error when bettery close to EOS.
in this document Alternative Gauging Techniques for Flow Meters and the Benefits of the bq35100…
Part Number: BQ35100 Other Parts Discussed in Thread: BQ2052 , , BQ34110 Tool/software: Hi,
We are powering a devce with 2xAA batteries of three chemistries mentioned. Just need to plot an approximate state of charge on all three. The type of battery…
