Hi, just wanted to get back to you on your primary Alkaline battery, our battery expert recommend using bq43110 gauge with chemID 0600 for your Energizer battery and not bq35100 although bq35100 is for primary batteries (targeted for Lithium batteries…
Part Number: BQ35100EVM-795 Other Parts Discussed in Thread: BQSTUDIO , BQ35100 Running bqstudio v1.3.54 and selecting " 0100_1_02-bq35100.bqz " as target gives me a prompt reading " The detected device is not compatible with this application! Some actions…
Part Number: BQ35100EVM-795 Other Parts Discussed in Thread: BQ35100 Tool/software: Linux Hi support
I have some software question about the Gauge IC(bq35100).
We want to know how to to program and read this IC .
I t ry to read the register voltage…
Alright replaced the BQ35100 chip and the EVM is up. I need some help with the calibration. As per recommendation, I performed Voltage calibration, temp, CC and Board offset. With no load connected the current was 0mA. without performing any current calibration…
Hi John,
Lithium Thionyl Chloride (Li-SOCl2) is a primary cell. I would recommend using bq35100 for primary cell applications. bq27542-G1 is for secondary cell applications.
To answer your temp sensor question, yes bq27542-G1 has an internal temp…
Part Number: BQ35100EVM-795 Other Parts Discussed in Thread: BQ35100 , BQSTUDIO I am just starting to test the bq35100 and I am having a lot of issues with getting the remaining battery capacity. I am using a Tadiran TL5903 (2.4AHr @ 3.6VDC lithium-thionyl…
Hi Axel,
hte bq2052 is old and NRND. Pls we have a newer bq35100 particularly suited for Li thionyl chloride and LiMnO2 batteries. If you aren't far out into your design, i would recommend using this.
thanks
Onyx
Hi Rolan,
The standard CR2450 coin cell is a LiMnO2 battery. We have a device designed specifically to gauge this type cell, please look at bq35100 .
Thanks,
Terry
