Other Parts Discussed in Thread: BQ51014 , BQ51013A For the bq51013A and bq51014 in the YFP package, there are multiple pins marked as AC1, AC2, RECT, and OUT. What is the purpose of these extra pins and how should they be handled if they are not used…
Other Parts Discussed in Thread: BQ51013A Bill,
I'm using the TS-CTRL feature of the bq51013a to send an EPT termination to the transmitter when charging is complete. This works great; the transmitter turns off its "Charging" LED and the bq51013a shuts…
The signal is the normal standby for the 211, analog ping followed by digital ping. The RX is not detected, during the digital ping it should power the RX and it will respond with signal strength, ID and Config. See the bq51013A EVM User’s Guide figure…
Other Parts Discussed in Thread: BQ51051B , BQ51013A Is it necessary to utilize the TERM input for a programmable upper termination threshold? I am coming from a previous design using bq51013A where I used this pin as an enable pin for wireless charging…
Other Parts Discussed in Thread: BQ51013A , BQ51013B I found a bq51013A 765 EVM with QFN package as below link.
http://www.ti.com/tool/bq51013aevm-765
Is there bq51013B EVM with QFN package?
Regards, M. Emi
Other Parts Discussed in Thread: BQ51014 , BQ51013A The bq51014 seems to have overcurrent and overvoltage protection for adapter input. Surely, you’d always want that?
RX ICs bq51014 and bq51013A and I can’t find any difference between the two.
1Q.) How to make bq500211a-evm transfer power to any qi receiver?
1A.) It will transfer power to RX when placed on TX pad automatically.
2Q.) Now, I put qi receiver on bq500211a-evm and it is not transfer power to qi receiver. What should I do?…
