Other Parts Discussed in Thread: BQ76920EVM , BQ76940EVM , BQ76940 , BQSTUDIO , EV2400 , BQ78350 Hello,
I tried to connect via I2c to the BQ76920EVM and BQ76940EVM boards through the EV2300 interface, but I always get the " unable to detect a connected…
Part Number: BQ76940 Other Parts Discussed in Thread: BQ76200 Hello We are designing a system composed by bq76940 , bq78350 and MSP430. The communication with the external world will be done by the MCU via RS485 (Isolated). In one of your materials it…
Hello, Michel.
As I mentioned earlier, we are designing a system composed by bq76940, bq78350 and MSP430. The communication with the external world will be done by the MCU via RS485 (Isolated).
We were reading your reference designs/FAQ and we have…
Hi Thomas,
We have tried to run the same tests with the BQ76940EVM which we had completely forgotten about. We tested the AOLD and ASCD faults, and they were both successfully cleared. We used a logic analyzer and saw that the BQ76940 register at address…
Hi Steve,
The bq76940 will work with a minimum of 9 cells, that is due to minimum operating voltage, biasing, and communication between the cell groups. If you connect a bq76940 with only 8 or fewer cells as would be intended for a '930, you will have…
Hi Paul,
Q0: Programming the firmware is the typical way to get a known configuration. There are not established configurations, you must set parameters appropriate for your system. Once you have them set you can export the file. You can edit these files…
Part Number: BQ76920 Other Parts Discussed in Thread: BQ78350 , BQ76940EVM , BQ76930EVM , , BQ76930 , BQ76940 , TIDA-00449 rHi, a customer I support wants to use the BQ76920 with their own MCU.
Questions: Referring to the datasheet example schematic…
Hi Matt,
I have done the test with your Starter Kit BQ76940EVM.
With and without the jumper on the PRES pin, the BQstudio detects with green and red, BUT is discharging all the time!!!!!
Attach the log and the gg.csv.parameters.
In addition the…
Other Parts Discussed in Thread: BQ76940 Dear WM5295,
I use two bq76940 for 30cells~
Now I want to know if the Rsns resistance can be put on the PACK+ side?
Other Parts Discussed in Thread: BQ76930EVM , BQ76930 Hello Ti,
Some time ago I was able to download the full design files of the BQ76930EVM, I believe we have lost the files in a clean system reinstall, we have purchased this EVM, but now it seems…
