Part Number: BQ76942EVM Other Parts Discussed in Thread: BQ76942 , EV2400 Tool/software: Dear Ti,
we are using BQ76942EVM , and tried to connect with Battery management studio. It Shows Auto detected : None and lands me to device selection, where selecting…
Part Number: BQ76942EVM Other Parts Discussed in Thread: BQ76942 , BQSTUDIO , EV2400 Tool/software: Hi! I've been evaluating the BQ76942 and all was well. I've struggled a few times to get it to connect but usually it was a power issue, I turned on…
Part Number: BQ76942EVM Tool/software: Is there somehow a way to enable FETs via a pin, and therefore not enabling through the commands.
Since its possible to set the FETs off via a pin, I figured it may be possible.
I looked it up but haven´t found…
Part Number: BQ76942EVM Other Parts Discussed in Thread: BQSTUDIO , , BQ76942 Tool/software: Hello,
I am working with the BQ76942EVM using BQStudio V1.2.127. In the Monitor section, I see various options for selecting a target related to my EVM, such as…
Part Number: BQ76942EVM Other Parts Discussed in Thread: BQ76942 , BQSTUDIO We have got BQ76942 EVM for evaluation.
We want to get the OTP programmed from factory with fixed configuration file.
Kindly suggest some way out.
Or kindly suggest some easy way…
Part Number: BQ76942EVM I am currently balancing a 6S LiPo battery. In the relax mode I am currently balancing with 45mA. It took a very long time to balance the battery, is there a way to get more current to speed up the balancing process?
Part Number: BQ76942EVM We are trying to charge a 6S 7000mAh LiPo battery. We have not been able to get the EVM to go into balancing mode. I have attached our configuration file and a picture of how we have the board connected to our battery. We have…
Part Number: BQ76942EVM Other Parts Discussed in Thread: BQSTUDIO , I am trying to autonomously balance a 6 cell battery using the BQ76942EVM. I have BQStudio and followed all the setup steps in the user guide. I have also changed the charge threshold to…
Part Number: BQ76942EVM Other Parts Discussed in Thread: BQSTUDIO Hi,
I would like to know little more about the Cell balancing.
I am using 6 Cell Battery pack and For testing I discharged Cell 5 to 3.8V and started charging by connecting the BQ76942EVM…
Part Number: BQ76942EVM Other Parts Discussed in Thread: BQ76942 , BQSTUDIO , BQ76952 Hi,
I am trying to interface external Controller board to BQ76942EVM.
Below are the connectivity
1. Removed Jumpers J15 and J12
2. Connected SDA and SCL @J11 & J14…
