Part Number: BQ76952EVM As can be seen in the bottom line below, PF_EN is True and FET_EN is False. I verified that Settings:Manufacturing:Mfg. Status Init was 0x0010 so both of these bits are wrong. I even wrote that byte again with no effect.
I am using…
Part Number: BQ76952EVM Other Parts Discussed in Thread: BQSTUDIO Hi! :)
I using BQstudio with BQ76952EVM.
I have some question for Data Graph
This device has 16ch battery monitor,
but BQ studio can dispray only 6ch.
I want dispray 16ch with BQ76952EVM…
Part Number: BQ76952EVM Other Parts Discussed in Thread: BQSTUDIO , Hi
I am using BQ76952EVM with BQStudio.
I am trying to Enable LDO (REG1, REG 2) i.e in data memory REG12 config = dd and REG0 config =1; But I do not see do not see 3.3 of REG1 and REG2…
Part Number: BQ76952EVM Other Parts Discussed in Thread: BQ76952 Hi expert
I am grateful to be able to use a good product.
I have a question about how to set up cell V alarms in BQ Studio.
BQ Studio can be monitoring Max 16 cells, but I'm monitoring only…
Part Number: BQ76952EVM Hi Team
I am using BQ76952EVM,Can you tell me how the circuit in the red circle works?How should I choose those component parameters?
Thanks.
Part Number: BQ76952 Hi
We have developed our BMS board based on BQ76952. We have followed BQ76952EVM schematic.
BAT+ is 52 Volts.
On Q2 base it should be stable 6.0 volts but we are getting transients as in following figure
and at the emitter 5.5 vols…
Part Number: BQ76952EVM Hi team,
The customer wants to know why the DSG has charging path and discharging path but the CHG does not have such path in out evm.Could you please help to explain it?
YOURS
NAN
Part Number: BQ76952EVM Other Parts Discussed in Thread: BQSTUDIO The ALRT_PIN, DDSG_PIN, and DCHG_PIN bits in the FET Status register are asserted. However, no protection or PF trigger has been identified.
Meanwhile, the SSBC, SSA, and PF bits in the…
Part Number: BQ76952EVM Other Parts Discussed in Thread: BQ76952 , , BQSTUDIO Hi Ti Team,
I am using BQ76952 BMS IC for battery managment with STM32 host microcontroller. Currently i am facing a problem regarding ALERT pin. I configure ALERT pin so that…
Part Number: BQ76952EVM Other Parts Discussed in Thread: BQ76952 , BQSTUDIO My EVM board is taking high current ( more than 150mA). I checked the resistance between TP2 and VSS. It is coming around 70 ohm.
Does it mean AFE is damaged ? I connected the DSO…